Boat Plans At Mystic Seaport | Hiding from the spring weather

Boat Plans At Mystic Seaport

But its not a complete loss of time.

Its Thursday evening, Im still house sitting my sisters house up in the bush at the top of the hill. This ia a very peaceful place, and I’ve been able to spend some time working on the drawings for both SEI and the Saturday Night Special.  I’ve written building guides for both, materials lists, and some words of general advice.

Both sets are now done, all ready to go out and help people create their dreams. They will be sent off to the print shop and I’m expecting them to be scanned and back to me in digital form about Wednesday next week.

Tomorrow though I’m onto the next one that’s the boat that I’m drawing for my own use, for a particular project / voyage / adventure I have in mind.

“Long Steps” is  if you like a slightly larger version  of Walkabout, long and slim, a reasonable rowing boat that I expect will sail well. She has though the centre area of SCAMP including the self draining cockpit floor with a water ballast tank under, a similar raised locker and veranda “cabin” which like SCAMP provides high up bouyancy to assist righting after a capsize, gives much dry storage and some shelter from the elements.

She will be cat yawl rigged, that’s two masts, a big balanced lug main and a triangular mizzen, will have the same offset centerboard that has been so successful on SCAMP, that gives space in the cockpit which is to be wide and long enough to sleep in, and I am drawing in an area aft of that with the full depth and width of the boat in which to stand and move about when sailing.

Ill be carrying a swimming pool bean bag in there so can sail in some comfort.

The boat is intended for very long range voyaging, at times in areas where there are no harbours for overnight refuge so she will be set up to lie to a sea anchor.

Im going to get this far enough along to allow me to start the new boat, I’ve got two other design projects plus a couple of small modification drawings to do as well.  I need to get them done so I can get out sailing when summer gets here.

Adventure cruising? The years keep ticking past, there are only a limited number of them and no one knows just how many each of us have, so its time I got out there and did some serious adventuring.  My philosophy is that life is what you use to build up the memories that sustain you in your old age.

I’ll have a pic of Long Steps in the next posting on this blog, the current working drawing is a work in progress, and as with all works in progress it’s a mess and wont make a lot of sense to anyone but me.

Oh yes, it will be back to sandpaper and paintbrush on SEI next week.

Watch this space.

Do you find information about Boat Plans At Mystic Seaport are you looking for? If not, below may help you find more information about the Boat Plans At Mystic Seaport. Thank you for visiting, have a great day.

Read More..

Boat Plans And Patterns | Old tools but good ones

Boat Plans And Patterns

Tools.

I’m not really a tool freak, not a collector in the sense of lovingly restoring old woodworking hand tools and putting them on display in glass fronted shelving but I do enjoy getting my hands on old tools and bringing them back to life. When I’ve a particular little job that needs a special tool, and I can go to my shelf and pick up a tool that was designed to do that special thing, I get great satisfaction from using it.

So I watch out for the unusual as well as the standard ones that I use every day.

Junkshops, garage sales, on line auctions and occasionally a friends eagle eye all bring in treasures.

My usuals the ones that I’ll buy without thinking are the Record and Stanley number 3 or number 4 planes.  Those are tools that I use every time I go into the boatshed, and now, living on the ship with the boatshed here plus my old shop back in Hamilton still being used, I have built up a double set of tools.

I’ve now 10 of those, the reason being that when working and one wears its sharp edge off or I hit something that puts a nick in the blade, that plane goes in the shelf above and I pick up another that’s sharp and set.

To be sure, when they’re all in need of a sharpen it’s a big job, but on a wet morning when there is no one around its quite a satisfying thing to set up an assembly line with the dry grinder, the wet grinder, the two different grade waterstones and the lap, and run through them all.

I digress.

Just recently my friend Paul Mullins came across a couple of unusual tools when a neighbours shed was being cleaned out.  There was a Stanley number 67 Spokeshave, this one is designed to cut right up against an edge and could be used to tidy up a curved rebate, left or right handed. 

The number 67 spokeshave, note how the handles can be repositioned to allow it to work against a rebate, that can be done either side.  Interesting tool.

The other is a router.  No, not one of those noisy finger biting things a “real” one.  Used to be known as a “Grannys tooth”. Its a Stanley number 71 1/2,  one of a series of different sized routers that Stanley made.

It’s a hand tool, essentially a flat plate with a pair of handles and a cutter that extends below the plate, push it and it cuts away below the surface, the cutter can be set for depth so its able to gradually work away increasing the depth of the cut.

Excellent for relief carvings.

Stanley number 71 1/2 router with 1/2 in and 3/8in cutters.  I do use one of these now and again, have also the very small one which I use when carving tabletops and such.

 Note that these, like almost all Stanley tools found in New Zealand or Australia are English Stanley so there are some differences from those made in the USA.

I was thinking that I should be looking for a brass wire brush to start tidying these two treasures up, they’ve been soaking in Inox for a while now, and are ready or a cleanup before I regrind the cutting edges and flat the backs of the irons, when my very elderly uncle, a joiner by trade, gave me a Stanley number 55 combination moulding plane that he’d had since very early in his career.

Its got all the standard irons, no parts missing, it’s a real treat!

Heres the link to a page of pics.

https://www.google.co.nz/search?q=stanley+number+55+combination+plane&client=safari&rls=en&tbm=isch&tbo=u&source=univ&sa=X&ved=0CCgQsARqFQoTCOSjz6yy78gCFcxVPgodnjwAQw&biw=1024&bih=776

These planes can be used to make mouldings. Look around your house at picture frames, the surrounds of windows and doors, skirting boards ceiling coves, cupboards and chests and you’ll see a huge variety of different shapes.  This plane can make all of those.  Not in one pass you understand, but by planing away part of the profile then changing the blade and the positioning of it, it then does another part of the shape.

 In its original box, this ones done quite a lot of work but all of the original parts including "the book" are there and in good order. 

 There are a lot of parts to one of these, the handle is out to the left and each of the parts to the right is a separate fence and depth gauge system, some of which have knife holders as well as scribers. 

I should have counted them, there are probably 40 different knives in the set, rounded, radius edge, beading, rebate, oogee, you name it.  Amazing tool.  Yes Ive used one, but its not something that Id use every day. This is a collectors item, will be greased up and stored, but maybe, just maybe, Ill need it to produce a moulding to match something existing someday.

Theyre slow, but if one is matching up a section no longer available off the shelf, or too big for a router bit (the electric finger biting kind not the one above) it’s a practical and useful tool.

That plus it’s a really impressive thing to show off with.

I need more shelves. 

Again.

Do you find information about Boat Plans And Patterns are you looking for? If not, below may help you find more information about the Boat Plans And Patterns. Thank you for visiting, have a great day.

Read More..

Small Boat Plans And Kits | Tools

Small Boat Plans And Kits

I was busy building a garage, Ive mentioned it before.  A kitset 6m x 3.5 m one from Trade Tested here in NZ,  it came in several cardboard boxes, not very big ones, and did those boxes  not seem like nearly enough to carry all the bits needed for a building that size.
It turned out to be so lightly built and difficult to assemble that I abandoned the build half way through, it took me a couple of hours to dismantle what had taken me an awfully long time to get built,  then a day to make up a complete pre nail wooden kit from 3x2 wood including five roof trusses, and a day to stand all that up and put the cladding from the kit onto that.
Weve now got a robust and tidy building that will withstand a good blow.

The point behind this epistle is, apart from dont buy  one of those cheap garden or garage kits, is that I had some serious trimming of sheet metal to do, and tinsnips just did not cut it ( pun intended of course)

So I want off to the hardware store to find a metal cutting blade for the skilsaw,  not a cutting disc for an angle grinder, this is a sawblade specific to sheet metalwork.
Found one, near enough a hundred bucks.  That was enough of  a shock that I had to go and browse in the aisle where all the toys are ( read, power tools,  Im a sucker) to get my breath back.

I found there one of those "twinsaws" that are advertised as being able to cut almost anything,  this was very similar to the Ozito brand one in this link http://www.bunnings.co.nz/ozito-1200w-125mm-corded-twin-cutter_p00318797   but was the very cheap Bunnings brand XU1  version. $65  .  The saw blade went back on the rack., and I took the twinsaw home with me.

The thing cuts like a Samurai sword production line test dept.  It cuts anything up to about 1/8in like butter, its not a high quality tool and I dont expect it to last forever  but it pretty much paid for itself in an hours work.

I dont think Id buy this brand if I were serious, but the Ozito one is a reasonable deal and the quality is reasonable for a tool that is not in full time use.

A word of warning though, theyre not good for cutting wood, they are specifically built for sheet and light sections of metal.

Interesting tool though, useful.

John Welsford

Do you find information about Small Boat Plans And Kits are you looking for? If not, below may help you find more information about the Small Boat Plans And Kits. Thank you for visiting, have a great day.

Read More..

Boat Plans For A Chesapeake Deadrise | A note on tools

Boat Plans For A Chesapeake Deadrise

A few things on tools that I have found out the past few days.

A japanese pull saw is awesome. I doubted it at first, hemming and hawing for months before getting a small one-sides saw. A FANTASTIC PURCHASE. Versatile, sharp, easy to use, and precise. Practice first, because youll saw through something important quickly and without realizing it (trust me).

My random orbital sander was a $9.95 DEATH DISASTER I purchased at cheap-tool-emporium Harbor Freight. Its so frustrating to use I want to throw it at the cement wall. I will have to go buy a better one that actually secures the sandpaper.

Most importantly, I was perusing my jigsaw blades and saw something called a "scrolling blade." It was small and skinny. "Hmmmm, I betcha this is for going around corners a little tighter than the normal blades!" Hmmmm, I reckon I was correct... and this was after I cut the hole through the transom, BH2 and BH3. Boo me, for not knowing my tools. Again, amateur style is my building style.

Do you find information about Boat Plans For A Chesapeake Deadrise are you looking for? If not, below may help you find more information about the Boat Plans For A Chesapeake Deadrise. Thank you for visiting, have a great day.

Read More..

Dinghy Boat Plans | Bottom surprise! and limber holes and gaps filled

Dinghy Boat Plans

Today I overturned my bottom after gluing it last night. I was all very nice and neat and did my best and I was welcomed to see the fair bottom of my speed-demon boat with THIS:


HELLO DRAG. A giant glue mess that I will have to sand smooth. Which, if I estimate correctly, will take forever and a half. I shoulda woulda coulda put packaging tape around the seam, but my side panel job came out so neat (probably because I didnt put glue between the panels) that I didnt think I would see this. Also, note the glaring holes from my finishing nails that I used to pin the buttstraps in place. SOB, I went right through the ply. This is very embarrasing, I havent gone through the ply anywhere where I didnt want to, this is the first time, and I have no idea how I did it. Again, I didnt do it on the side panels, so why now?

In other news, I planed down the new shims that will fill the gap between the bottom and the BHs, and cut/chiselled some limber holes. They look nice and neat from this angle because the ply is on the other side, which is all chipped up. I shoulda woulda coulda dammit scored the ply to get nice smooth cuts first, before going after it with my chisel.


Notice the stringy thing coming out of the limber hole... thats some fabric coming out from IN BETWEEN the layers of the ply! OOOooooooooh, mystery!

You may also notice the cloudy color, that because Ive sanded the layer of epoxy there in preparation for bottom being glued on. Ive decided to put in mini fillets along the BHs and the bottom for practice and to re-enforce the double seam, one between the bottom and the spacer, and the on between the spacer and the bottom of the BH frame.

Do you find information about Dinghy Boat Plans are you looking for? If not, below may help you find more information about the Dinghy Boat Plans. Thank you for visiting, have a great day.

Read More..

Boat Plans Catamaran | Some really good reading about a seriously good cruise in a pair of open boats

Boat Plans Catamaran

There are days when being an “armchair admiral” is not such a bad thing.  To sit warm and comfortable, listening to the wind shrieking and laughing at you as it tears through the trees with the driving rain rattling on the windows and shaking the doors is a very pleasant thing.  It’s a time to dream of warm days, sparkling water, golden beaches and gentle breezes.  Of meeting people who enjoy the company of small boat sailors, exploring places where one can pretend that no human has ever been before, seeing new vistas every hour of every day and  watching spectacular sunsets before retiring to a comfortable bunk and listening to the water lapping at the side of the boat.

Its such a day here, springtime, and I wont go on about it because I’ve said it all before, springtime can bring tough weather here.  But I’ve been sitting in my bunk, the boat surging at its dock lines, the wind doing all that stuff while I read this wonderful account of a cruise in a pair of “my” boats in Shark Bay, waaay north of Perth in Western Australia.  It’s a great story, well written, well illustrated with both pics and video, so get your coffee made, sit down in a comfortable place, and read on.

http://www.gaffrigsailinginwa.org/shark-bay-001

Many thanks to Author Paul Ricketts and cruising companion Peter Kovesi for sharing this, and to the “open boat” Yahoo group from which I got the above link.

Great stuff guys, keep up the good work.

Do you find information about Boat Plans Catamaran are you looking for? If not, below may help you find more information about the Boat Plans Catamaran. Thank you for visiting, have a great day.

Read More..