Canoe Boat Plans | MAIDEN VOYAGE

Canoe Boat Plans

On June 12, 2010, I humbly presented to Poseidon my Goat Island Skiff along with the requisite champagne on the waters of Lake Sunapee, NH.  I now present to you,

I Am Zinea, Pterodactylus

May you enjoy fair winds and following seas,
High adventure and times of quiet relaxation,
May you always find the port before the storm,
and may you never abandon your crew in their most dire moment of need. 

What can I say, I enjoy long absurd names for my boats.  Pterodactylus was part of the pterosaur family.  Usually they were light, fast, small flying dinosaurs that have been widely hypothesized to live near the sea.  Some larger pterosaurs were definite coastal cruisers, so close enough for me.  I went to the American Natural History Museum in New York and spent some time enthralled with all the dinosaurs and pterosaurs.  They were cool.  My boat is cool.  It all works out.

Under rainy skies and low overcast, and when most lakes were glassy calm, we were able to find a fairly steady light breeze, and do some sailing!

My lovely wife also got me a wonderful present for the launching of the boat, and it was full of Pussers!

A salty gift if I may say so myself!

HOLY BALONEY BATMAN! SHE IS LAUNCHED!

More posts detailing some fixes and other maintenance items, including sailing adventures are to follow.

Do you find information about Canoe Boat Plans are you looking for? If not, below may help you find more information about the Canoe Boat Plans. Thank you for visiting, have a great day.

Read More..

Dinghy Boat Plans | Bottom surprise! and limber holes and gaps filled

Dinghy Boat Plans

Today I overturned my bottom after gluing it last night. I was all very nice and neat and did my best and I was welcomed to see the fair bottom of my speed-demon boat with THIS:


HELLO DRAG. A giant glue mess that I will have to sand smooth. Which, if I estimate correctly, will take forever and a half. I shoulda woulda coulda put packaging tape around the seam, but my side panel job came out so neat (probably because I didnt put glue between the panels) that I didnt think I would see this. Also, note the glaring holes from my finishing nails that I used to pin the buttstraps in place. SOB, I went right through the ply. This is very embarrasing, I havent gone through the ply anywhere where I didnt want to, this is the first time, and I have no idea how I did it. Again, I didnt do it on the side panels, so why now?

In other news, I planed down the new shims that will fill the gap between the bottom and the BHs, and cut/chiselled some limber holes. They look nice and neat from this angle because the ply is on the other side, which is all chipped up. I shoulda woulda coulda dammit scored the ply to get nice smooth cuts first, before going after it with my chisel.


Notice the stringy thing coming out of the limber hole... thats some fabric coming out from IN BETWEEN the layers of the ply! OOOooooooooh, mystery!

You may also notice the cloudy color, that because Ive sanded the layer of epoxy there in preparation for bottom being glued on. Ive decided to put in mini fillets along the BHs and the bottom for practice and to re-enforce the double seam, one between the bottom and the spacer, and the on between the spacer and the bottom of the BH frame.

Do you find information about Dinghy Boat Plans are you looking for? If not, below may help you find more information about the Dinghy Boat Plans. Thank you for visiting, have a great day.

Read More..

Boat Plans Bartender | Seats fitted

Boat Plans Bartender

The seats are all fitted to the boat. The glue is cured on the supports, the vertical supports have been cut to fit (they will be glued next session) and the seats are in place. The side-arms for BH2 and 4 are cut and ready to be glued. The knees are cut and almost finished. Inwale spacers are cut, the inwales need to be scarfed and theyll be ready too. Things are moving.

Heres a great example why you want to diagram out the dimensions of the front seat per the plans, and then trace something to what youve actually got in the boat before you cut:


Unless youre a very gifted woodworker, of which there are many out there (this is an AMATEUR BLOG, remember?) tracing will be beneficial. The dark black lines are per the plans for the GIS. What you see is what my front seat ended up being to fit in the bow. A little wider up front, very close in the middle, and then wide again in the rear. Ive got a few ideas how this came about, but Im glad I didnt just cut and then try to fit it only to find huge gaps both in the boat and in my wallet as I shelled out 60 bucks for another sheet of ply. This is not a big deal in the end, its truly a slight variation of shape up front, and so it goes.

Heres a few exposures of my beautiful craft as she comes together. Looking good!




Do you find information about Boat Plans Bartender are you looking for? If not, below may help you find more information about the Boat Plans Bartender. Thank you for visiting, have a great day.

Read More..

Boat Plans And Patterns | Cutting holes into the bottom of the boat

Boat Plans And Patterns

There comes a time when every man needs to pass through some hurdle and move from childhood to adulthood.  Theres a small period in between called "limbo" by various anthropologists.  In the course of building this Goat Island Skiff that rite of passage is the cutting of the daggerboard slot in the bottom of the boat, the limbo is staring at the hull and imagining what you are about to do.  Translation for the non-boat crowd:  I have to cut a gaping hole in the bottom of my boat, and its gotta be dead on with the case on the inside, or else gallons of water will pour into the hull and my expedition is over.

The intrepid reader will remember the positioning of the case in the interior of the boat.  Now, I have to cut the hole on the other side.  In an ideal world, I would have drilled two pilot holes before I glued in the case, so I wouldnt be hunting around in the blind.  However, the way my case was built and how it fit (badly) this was not possible without severely complicating matters.  It was in my best interest to install the case and figure out the slot later.

So I carefully measured the exact middle of the boat from edge to edge, then again opposite, then again from the runners.  I knew that the seam between the two pieces of ply that comprise the bottom fall where the slot is, so I only needed to make lateral measurements. Then, a small pilot hole:

Success!  I hit it on almost perfect!

Then, thanks to my very good friend Peter who takes pity on me, I was able to route out the slot with his amazingly slick router.  He has to give me a primer on how to use it everytime, but thats ok.  I drilled a 1/2" hole, and then began the terrorizing task of cutting a mondo sized hole into the bottom of my boat.  I used a flush-bit.  If there is ever a time for a man to get nervous this is it.  This is where I left boat-building childhood and became a man.  I stuck the router bit into the hole and routed away.

It smoked some, but in the end, the result was mega-awesome.  Precision slick.  Slot, accomplished!

So this is all very awesome.  Sailboat now she is, for sure.  This is the one unmistakable sign of a sailboat, a slot in the bottom.  Vindication and satisfaction is seeing that the slot lines straight up with the centerline drawn on the bottom of the boat from days long gone. 

Do you find information about Boat Plans And Patterns are you looking for? If not, below may help you find more information about the Boat Plans And Patterns. Thank you for visiting, have a great day.

Read More..