Boat Plans Nz | Moving along

Boat Plans Nz

A bunch of small items were taken care of today despite my continued head cold and heavy congestion. Sneezing and coughing and snotting all over my boat was a great experience, really.

Anway, All the BHs are beveled, I notched the top frame on BH3 where the middle 90mm was supposed to have never been applied (room for centerboard case), and I cut and traced out the timber for the stem. I also cut the holes into the BH 2 and 3:


Theyre still rough, I havent sanded them smooth or even yet. You may notice I went for the trapezoidal shape on BH2, this was at first done because I was a little nervous doing circles with the jigsaw a la transom. After I did it, I thought, damn, that looks bad. But then I realized that without the curves I can stuff more equipment (picnic basket, wine, beer) in that forward space between BH1 and 2. So I liked that, but then I waffled back to cutting a bigger hole to get curves. At this point my wonderful wife wandered in as I sat perplexed, and she gushed at how imaginative I was for mixing and matching shapes for the holes and how great it looked.

The trapezoid stays, gentlemen.

Up next:

• Shape and finish the dreaded stem
  
• Cut timber and scarf chinelogs
• Apply re-enforcement on transom for rudder
• Cut notches on BHs for chinelogs
  
• Coat all BHs with epoxy (I may do this later because Im getting impatient to see the boat)
  
• Glue up the sides
• Touch up with the plane
• Screw it all together for a dry fit in the garage
• Freak out as I try to find a warmer place than the garage to put it for the winter so I can work on it.
  

Do you find information about Boat Plans Nz are you looking for? If not, below may help you find more information about the Boat Plans Nz. Thank you for visiting, have a great day.

Read More..

Pontoon Boat Plans | Life in La Cruz

Pontoon Boat Plans

The Honcho has been berthed at the Marina Riviera Nayarit for the last week, where we have done some routine maintenance and given the boat a thorough washing. Weve also taken time out to socialize with fellow yatistas and enjoy the local culture here in La Cruz. In this town, the local culture is a very pleasant mix of Mexican food, art, music and society on one hand, and the whole expat sailing community on the other.  The sailing community consists of people who are following the dream of traveling by boat to foreign destinations. Most are Yanks or Canadians, a few Europeans, and the occasional Aussie or Kiwi. Im fortunate to be fairly fluent in Spanish and have enjoyed becoming acquainted with some of the locals who live and work here in town. Both groups seem to be happy with their lives and are very friendly. One of the most pleasant surprises for me is meeting young Mexicans who are university students. I love hearing their ideas and opinions regarding their lives. Overall, they seem to be quite optimistic about their futures as well as the future of Mexico. I think their optimism bodes well for this country, in spite of the widespread poverty and the ongoing drug wars in some areas.

The Honcho has sailed almost exactly 2,000 miles since leaving Long Beach and I am happy to report that the boat has performed very well throughout the voyage and has done everything weve asked of her without complaint. Once a fuel filter became clogged and the engine wouldnt start.  Another time, we took a wave over the bow with the window over the galley open. Sea water ran into the stove burners and clogged them up. Aside from that, the boat just keeps on keeping on. I brought a Baja Filter from Long Beach, but didnt use it at first because it appeared that all the fuel we bought was clean. I was wrong about that, so now I use the filter whenever we fuel up. It slows down the process of fueling, but I think its well worth the extra hassle to be assured of clean fuel. If youre getting ready to head south, pick up a Baja Filter at your local West Marine store. Its cheap insurance.  Overall Im very happy with the boat and all of its systems. Of course were only about halfway through this voyage, and only the little half at that. As we travel north into the Sea of Cortez, well be visiting more deserted anchorages, and more primitive places, so reliable equipment and self sufficiency will be necessary.

Part of the reason were hanging out in La Cruz is the upcoming XIX Regata Internacional, otherwise known as the Banderas Bay Regatta March 10-12. Ill be sailing aboard a Beneteau 42s7 called Tivoli in that event. It should be a lot of fun and Ill post a report on all the festivities after the regatta.

Do you find information about Pontoon Boat Plans are you looking for? If not, below may help you find more information about the Pontoon Boat Plans. Thank you for visiting, have a great day.

Read More..

Plywood Boat Plans Australia | I make my first bevel

Plywood Boat Plans Australia

I had to bevel the seat cleat on the transom for the rear seat. This is a harrowing proposition for me because, a: I do not know how to bevel things, and b: I do not want to screw this up too much because then nothing will fit. Fortunately, I had the mind to ask over at the Storer woodworking forum first, and basically, I take my hand plane to it and plane away. So thats what I did, and I successfully beveled my seat cleat the 4mm. PHEW! Not so bad! Of course, I say that now. Time to start learning how to keep my plane blade sharp. Heres a pic, but the cleat is not oriented in the correct position, worry not GIS fans!



Do you find information about Plywood Boat Plans Australia are you looking for? If not, below may help you find more information about the Plywood Boat Plans Australia. Thank you for visiting, have a great day.

Read More..

Boat Plans Canada | Transom takes a hit!

Boat Plans Canada

In the course of beveling the bottom edge of the transom, I took a couple of chunks out of the endgrain of the starboard side frame. Then, I head a ***CRACK*** on one pass of the plane. I ripped a sizeable piece of the side frame away from itself. I carefully chiselled off the exposed end, and on another pass from the plane... ***CRACK*** and I took another strip, this one very deep. I can epoxy this all together, but Id just as rather not have the integrity of the wood comprised. I only had one remaining bevel left with an endgrain, and I beveled it with a rasp and then planed the rest to match. Dammit-- This is an amateur mistake! Other amateurs beware!



Take note that I did not break the epoxy bond between the side frame and the transom ply, the surface layer of the side arm remains firmly glued to the ply.

Do you find information about Boat Plans Canada are you looking for? If not, below may help you find more information about the Boat Plans Canada. Thank you for visiting, have a great day.

Read More..

Boat Plans Wood | Beneteau First 42s7

Boat Plans Wood

A few days ago a Beneteau 42s7 arrived on our dock in Marina La Cruz. The owner, an Aussie, bought the boat in L.A. and is sailing it home to Australia. The 42s7 is a big sister to the Honcho, so naturally I jumped at the chance to go for a sail aboard her. We left the dock around 11:00am and sailed a nine mile beat out to Punta de Mita in a breeze that started at about 6 knots and built to about 16 as we approached the point. Flying a fairly tired dacron main and 120% roller furling jib and towing a dinghy, we werent exactly setting any speed records, but I did get a good sense of how the boat might perform if it was set up in racing trim.  Handling, as you would expect from a Farr design, is crisp and positive.  In light air the boat was sticky, but I attribute that to the small jib and the dinghy we were towing. As the breeze built to about 10 knots the boat began to come alive, and by the time we got close to the point, we were passing all the other boats in sight in spite of the tired sails and dinghy. It is very clear to me that this boat, in racing trim with a good suit of sails will be a pretty effective racer.

Beneteau 42s7
This and all other images of the 42s7 were taken from yachtworld.com, where there are several of these boats listed for sale

Here are some dimensions and stats:
LOA:  42- 6"
LWL: 35- 9"
Bmax: 13- 6"
Ballast: 5,840lb (std), 6,283 (race)
Draft: 7- 7" (race), 5- 11" (standard), 5-6" (shoal)
Sail Area: 771sf (std), 845sf (race)
Displacement/Length ratio: 178
Sail Area?Disp ratio: 17.8 (std), 19.5 (race)

The boat we sailed aboard has the deep keel and standard rig. This is a good combination where there is plenty of water, but the deep draft limits where the boat can be cruised. The taller racing rig includes running backstays, which most cruisers would object to. The hull, rig and foils were designed by the Bruce Farr office while the styling and interior were done by Philippe Starck. The Honchos styling and interior were also done by Starck, with the hull and foils by Jean Berret. While the Honcho has impressive sailing performance in view of its cruising accommodations, the 42s7 is certainly the better performing boat for its size. Drawing from their vast experience with racing yachts, the Farr office gave the 42s7 a slippery hull with a fine entry, relatively narrow beam and fairly powerful stern sections. This hullform is more racer than cruiser and that racing pedigree makes the hull a pleasure to look at.

On deck, the similarities between the 36s7 and 42s7 are obvious. Both boats have sleek cabin trunks and very distinctive styling. In my opinion the 36 is the better looking boat with regard to the decks. Designed after the 42, it shows subtle refinements to the shape and details that I find more attractive and functional. With that said, both boats suffer from cockpits that are too small for really comfortable cruising or racing efficiency. Being from sunny California, I like big, comfortable cockpits and it would have been very easy for the designers to make the cockpits longer and more spacious, thus making them better for both cruising and racing. The cabin trunks on both boats are very wide, leaving little space to move around the decks. I understand the reasoning behind this, a wider cabin trunk means a more spacious interior, but my preference would be to go with a slightly narrower cabin and wider decks.

Large dinette

The 42s7 has a unique swimstep arrangement. It pivots out of the transom to create a large and convenient platform, and when in the stowed position, fairs into the transom. There is a lot to like about this arrangement but I would be just as happy if the builder had opted for an open transom. As you know, I had to build a swimstep on the Honcho and would have been much happier if it had been built with an open transom or at least had a serviceable swimstep molded into it. I should say, however, that within the crowded confines of the 42s7s cockpit, everything is egonomically sound and well designed. This particular boat has the mainsheet traveler mounted just forward of the helm, which is good from a sailing standpoint, but makes it difficult to lie down on the cockpit seats and take a snooze, which is very important to me. Fortunately Beneteau molded a beam into the cabin top where a mid-boom traveler can be installed, and many of the 42s7s have that arrangement. I was aboard one with a mid-boom traveler not long ago and its cockpit is definitely a friendlier place without being bisected by the traveler.

The 42s7 has the same type of cabin portlights as the 36s7. They open outward instead of inward. this has the benefit of making them better at keeping water out of the boat, but the drawback of being magnets for jibsheets. In fact, the Honcho had a broken portlight when we bought it because a jibsheet got caught on it sometime in the past. We are very careful about them when sailing.

The 42s7 has lots of space below. This is due in part to the smallish cockpit and the wide cabin trunk. The 36s7s interior layout is, in my opinion, just about perfect for a small cruiser. Having lived aboard the boat for several months now, I can say that its as comfortable and functional as can be expected in a small boat. The same is true, for the most part, of the 42s7.  Beneteau offered both a two-cabin, and three-cabin layout in the 42s7. The three-cabin version was probably intended for the charter business, with three large double cabins and the galley strung along the port side of the main salon. This galley arrangement would work well in an apartment but is not suitable for an ocean going boat. The two cabin version has a large and well designed U shaped galley aft to starboard in the main cabin. With the large dinette and tasteful design elements, its a nice layout for living aboard and entertaining.  Sleeping arrangements are great for cruising. The owners suite, just forward of the mast, includes a large pullman berth, lots of lockers and storage, and a private head and shower in the bow. There is also a large private stateroom aft to port, with an adjoining head. The only downside is the lack of good sea berths. Queen size berths are great at anchor, but when youre at sea, you want nice deep berths with secure lee cloths or boards.

Two cabin layout.

I occasionally hear critical remarks about the structural integrity of Beneteaus. After living aboard one, and crawling all over many of them looking for cracks and flaws, I can say that with regard to structural elements every one Ive been aboard has been very well designed and built. I did reinforce the stemhead on the Honcho, but there are dozens of unreinforced 36s7s sailing around without stemhead problems. There are lots of Beneteaus out there that arent pretty, or particularly good sailers, but Im pretty certain they are all structurally sound.  If I had the time, Id gladly jump aboard my friends 42s7 and sail it across the Pacific to
Australia.

Overall, I like the 42s7 quite a lot. Its big enough to be comfortable at sea, fast enough to make sailing it exciting and its nice looking too. I plan to do some racing aboard one in a few weeks...Im looking forward to that.

Do you find information about Boat Plans Wood are you looking for? If not, below may help you find more information about the Boat Plans Wood. Thank you for visiting, have a great day.

Read More..

Boat Plans And Kits | The new boat the design and the first piece of ply cut

Boat Plans And Kits

Long Steps, the build has begun.

I’ve four frames drawn, the stem, and the spine for the forward section, the mast box and some of the detail around the “cabin”.

The drawing is progressing in my “spare time” as I’ve other jobs to get completed before I’m really free to get on with my own project, but I need a break now and again and wanted to get started on “Long Steps” so the overall timeline does not become impossible.

To give an outline of “the project”.  I have thoughts that as the numbers on my birthday cake are getting alarmingly large, its evident that if I am to have that life defining adventure then I’d best get on with it.

A second motivator was an article in the newspaper last year that described the adventures of a young woman who’d kayaked alone right around New Zealand. It took her a year to cover the distance of around 2100 sea miles, with a few of breaks along the way. What an adventure, she’ll remember that forever.

I’m not quite as ambitious as that, but to get around the North Island is workable.

That’s about 1300 nautical miles, only a little less than the distance  around the British Isles, or the distance from San Diego to Seattle. About, don’t quibble over the odd mile or three.

In an open sail and oar boat. Mostly open anyway.

The circumnavigation of Te Ika a Maui ( North Island of New Zealand)  has some challenges, I’m planning to try local voyages first, and have put a lot of thought into the design,  so, below is a pic of the working drawing.

She’s 5.520 metres long, 1.660 wide, I’d expect a dry weight of around 220 kg.

That’s 18ft 6in x 5 ft 5in x 460 lbs.

Sail area 13.5 sq m / 145 sq ft.

One of the “interesting” things about the planned voyage is that there are at least two long stretches with either bar harbours with prevailing onshore winds or no shelter at all, even in favourable conditions these two stretches of coastline could take up to three days to cover so nights at sea have to be provided for.

Shallow draft is a must, there are some shallow river harbours in some places, but much of the course will be in very open waters, so this is to be essentially a blue water capable boat.

Now I’ve mentioned this to people who’ve banged on about Shackleton and Bligh, but I’m not that tough, so safety, self reliance in emergencies and a modicum of creature comforts are all part of the design brief.

What I’ve done is to take the midsection of the very successful SCAMP design, with its high up bouyancy, sheltered “veranda”, self draining cockpit and water ballast.  The same offset “board” and lying down space is there, along with the massive dry storage that the little boat offers.

This is fitted into a hull shape similar to that of the “Walkabout” design, that boat is very fast under sail, rows well, is easy to right if capsized, and is a very good load carrier.

The ducks and batten marking the curve of the stem.

I started the build today, drew out full sized and cut the stem and spine, cut and glued the doublers around the stem, cut and finished a stack of cleat material and sanded the whole lot so they’re going into the boat almost completely “finished”.

The first cut, thats a Makita 10.6 volt cordless circular saw, nice tool, very accurate, light and easy to use. Its great on plywood up to about 12mm.

The spine, stem, and mast box support will have B#1  B#2 and B#3 slotted over it egg crate style.

The jigsaw is a Makita 4200 BV, Ive had it for over 30 years and its done a huge amount of work.

Good machine.  As is the Japanese saw, wouldnt be without either of them.

Doublers cut out, the edges radiused with a router and all glued up. Progress already!

Tomorrow will see B#1 and B#2 cut out, I expect to be putting the whole lot together on the building frame in January, I have to extend the floor in the boatshed, plus have an adventure in the Straights of Magellan which will soak up a few weeks around the end of the year.

Plus I still have to get some work done.

But I’ve started. The boatshed / workshop is not empty any more, the symptoms of empty workshop syndrome are under control again.

Do you find information about Boat Plans And Kits are you looking for? If not, below may help you find more information about the Boat Plans And Kits. Thank you for visiting, have a great day.

Read More..

Boat Blind Plans | Lacoste 42 handsome yacht but a marketing fiasco

Boat Blind Plans

I usually contribute posts about French boats to this blog, but when I heard last week that Sparkman and Stephens, the most illustrious yacht design firm of the 20th century, had moved, after more than 80 years on Madison Avenue, NY, to new premises on the Connecticut shore of Long Island Sound, I thought I would feature an S&S design in this post to mark the historic occasion. Cunningly, though, I managed to find an interesting S&S boat with a very French story.

The fashion brand Lacoste is so well known all over the world that its easy to forget its French origins. Rene Lacoste was a French tennis champion, winner of 7 grand slam titles in the 1920s and 30s, whose nickname, "the alligator", was the inspiration for the logo on his tennis shirt - the first of many products marketed under the now famous Lacoste name. In 1985, the house of Lacoste, by then a global byword for sporty fashion goods, took the bold step of extending their brand into yachts - not just any yacht, of course - Lacoste yachts were to exemplify style, performance, and comfort, so naturally they went to the worlds most respected yacht architects for the designs.

Sparkman and Stephens designed at least two boats for Lacoste. One, a motor yacht, never went into production. Another, the Lacoste 42, a fast cruiser/racer, was built and marketed for Lacoste by the Dufour yard at La Rochelle. Though a very handsome, stylish and capable vessel it was not a great success in sales terms - only 12 were ever built

Looking at the photographs and drawings of the Lacoste 42, I think I can guess why sales were disappointingly slow. The boat suffers from a seriously split personality. On the outside it is a very high performance racing yacht, with a tall, narrow, complicated rig, a race-crew oriented deck layout and an aggressively honed, IOR-rating-tweaked, short fin and vestigial skeg underwater profile; inside its a de luxe holiday home with 3 double bedrooms, (each with ensuite facilities), a large galley and a spacious and comfortable saloon.

I imagine most of the marina posing types, who could have been attracted to the stylish and comfortable interior, would run a mile from the race-bred rig with its three-spreader mast, running backstays, hydraulically tensioned standing backstay and 2 inner forestays (one is detachable to ease tacking - the two guys on the foredeck in the publicity shot below are leaning against it).

Conversely, few of the hard-core racing crews capable of handling the big rig with its huge headsails and spinnakers would be likely to appreciate all the comforts of the double beds and triplicated shower and heads compartments.

Aside from that, the marketing and management suits at Lacoste probably knew little about the unglamorous wet, cold and bruising side of yacht racing, and the salt-stained welly-boot boat jockeys at Dufour equally little about fashion marketing - in short, a perfect recipe for a marketing flop. None were built after 1992, even though the Lacoste name was dropped and the yacht was rebranded as the Dufour 42.

A pity, really, because according to the accounts of owners and crews that you can find on internet forums, the Lacoste 42 made an excellent, long-legged cruising yacht. Even now, it seems that when they do come on the market they tend to sell for very good prices.

Lacoste/Dufour 42

LOA: 42-2"
LWL: 35-9"
Beam: 13-0"
Draft: 7-6"
Displacement: 16,538 lbs
Ballast: 7,124 lbs
Sail Area: 748 sq ft

Colour image right: a very handsome Lacoste 42 recently sold by Ancasta International Boat Sales.

Plans and drawings: Sparkman and Stephens

Do you find information about Boat Blind Plans are you looking for? If not, below may help you find more information about the Boat Blind Plans. Thank you for visiting, have a great day.

Read More..

Boat Plans Arch Davis | Second Gluing

Boat Plans Arch Davis

I just went back and glued on the side arms to BH1. This time it went much better than the first time. First, I used 1 pump of resin to 1/2 pump of hardener. Again, I tried to put it in a ziploc bag, but the whole thing turned into a mess, and I said screw it. So another pump and a half pump into a yogurt container, and I mixed in enough silica to make it thick like peanut butter, and then I spread it over the plywood with a stick. I took the remaining to coat in the inside of the arms. This time, it was much easier to work with. Im relatively pleased this time around, but Im still getting "creep." As in, my side arms are slowing sliding around to where they want to go, not where I set them and want them. Im not screwing my frames into the BH ply, but maybe I should? Theres not real method to the creep, the top and bottom frames crept inward, but my side arms creep outwards. I hover over the entire assembly and readjust as necessary to keep things were I want them. I dont know how else to do it.


What a mess. Again, "mY Fisrt Baot."

Im definitely saving the transom for last.

Do you find information about Boat Plans Arch Davis are you looking for? If not, below may help you find more information about the Boat Plans Arch Davis. Thank you for visiting, have a great day.

Read More..

Canoe Boat Plans | Golif the first all plastic sailing yacht

Canoe Boat Plans

The 23ft Golif was built from 1962 by the Jouët works at Sartrouville. Jouët claim she was the first production small offshore cruiser to be entirely built in GRP, and she caused a stir on her introduction at the first Paris Boatshow in January 1962.

The unusual name comes from a famously ruthless, daring, and reportedly amorous 17th century French pirate, Louis Adhémar Timothée Le Golif, also known as “Borgnefesse”. Since his nickname means something like "one-eyed-arse", you would probably have been wise to address him, at least until you got to know him well, as Captain Golif.

Golif was designed by Jouet with one eye on the American market, where the management believed they could sell a lot of boats. They had probably been helped considerably in their objective by the earlier successful transatlantic voyages of Jean Lacombe, in a plywood Jouet Cap-Horn. Apparently the companys market research suggested that the Americans favoured rather more interior comfort than the European market was used to, and that stiffness under sail and transportability by road would be important qualities for US buyers. Some of the Golifs characteristic features, such as its panoramic cabin window, shoal draft, relatively light displacement and high ballast ratio, stem directly from these market-related requirements.

Even today, Golifs looks seem rather quirky, though the underwater hull shape and the rig appear conventional. At the time, however, Golifs rig was considered rather tall and narrow, and the aluminium mast was in those days quite an innovation on a small cruising yacht. The odd pinched shape of the coach roof seems to have been intended to maximise the width of the side decks, but without sacrificing headroom in the places below where you might want to stand. Thus, with perfect French logic, there is low headroom over bunks and seats, where you sit or lie down, but there is plenty of headroom over the central passage and galley area, where you stand or walk. As the Jouët company said, this deck was designed from the inside!

Unusually for such a small boat, Golif had a decent chart table at which you could comfortably sit and work while facing the direction of travel, as you might in a much larger yacht. This was achieved by making the chart table swing down from the cabin deckhead right in the centre of the boat. Another innovation was a hinged and sliding hatch (visible in the colour photo of a Golif recently for sale in France)

Some versions of the Golif were delivered with an optional deeper keel for racing performance. These boats were excellent performers in offshore races and won many prizes, but it was a perfectly standard Golif that achieved the greatest fame for the class. In 1964, Jean Lacombe who had been Frances sole entrant in the 1960 Observer Singlehanded Transatlantic Race (OSTAR), returned to repeat the feat in a Golif, once again the smallest boat in the competition. This was the year of Eric Tabarlys first triumph, so Lacombes achievement was rather overshadowed by the acclaim and fanfares garnered by the winner. Nevertheless, Lacombes Golif took joint pride of place, alongside Tabarlys Pen Duick II at the centre of the 1965 Paris Boat show. (see photo)

There are varying estimates of the total number of Golifs built by Jouet and also by the Dubigeon yard in Normandy. The total number certainly comes to over 1000.

Jouët Golif
LOA: 6.50m
LWL: 5.92m
Beam: 2.22m
Draft: 0.96m
Displacement: 1200Kg
Ballast: 480Kg (cast iron)
Sail area: 23.2sqm

Many thanks to the French Golif owners website for all the b&w images and much of the information used in preparing this post. Colour photo of a Golif recently for sale in France from an advertisement on www.leboncoin.fr

A scanned copy of the original 1963 Jouet Golif sales brochure is available in .pdf format from Yacht Brochures.co.uk

Do you find information about Canoe Boat Plans are you looking for? If not, below may help you find more information about the Canoe Boat Plans. Thank you for visiting, have a great day.

Read More..

Boat Plans Skiff | Rig Conversion Update

Boat Plans Skiff

The new mast is scheduled to be delivered in early July. US Spars says the standing rigging from the original mast will fit so we wont have to buy new rigging. When the mast arrives well unship the old one and transfer the instruments and antennas, including radar and TV. We will also install a Tides Marine sail track and lazy jacks. There wont be much to do on the boom except add some sheaves and reefing lines. On deck well add a set of rope clutches for the reefing lines.  The new mainsail is also on order and we expect to have it in mid-July.

Do you find information about Boat Plans Skiff are you looking for? If not, below may help you find more information about the Boat Plans Skiff. Thank you for visiting, have a great day.

Read More..

Boat Designs And Plans | First Sail in Sea Pearl Scout

Boat Designs And Plans

Sails good.  More to follow.  Note 1991 Tohatsu 3.5hp long shaft outboard.  Holy baloney, outboards can be very, very nice.  And evil.  But nice.

Do you find information about Boat Designs And Plans are you looking for? If not, below may help you find more information about the Boat Designs And Plans. Thank you for visiting, have a great day.

Read More..

Boat Plans And Kits | Beneteau 423 First Impressions

Boat Plans And Kits

We took possession of our new 423 last weekend and renamed it Finisterra. Yesterday we went for our first sail and finally had an opportunity to try the boat on all points of sail under power and under working sails. Here is a brief summary of what we discovered.

We left the slip in the downtown marina and took advantage of the flat water and light air in the turning basin to see how the boat maneuvers in forward and reverse. Finisterra is equipped with a Slipstream 3 bladed folding prop. We found that it operates smoothly when going from neutral into forward or reverse and provides plenty of thrust in forward. Outside the marina we saw 7 knots with the Yanmar diesel running at 2,200 RPM. Since its a folding prop, it takes some throttle to get the boat moving when backing down, but overall performance is good. We had a three blade feathering prop on our last boat and it would occasionally snag some seaweed, so I think this prop is a good compromise for our purposes.

Sailing conditions were excellent with about 12 knots of breeze that built to about 16 in the afternoon. I unfurled the mainsail and I have to admit that its awfully easy to operate the in-mast furling system. We puttered around under the mainsail only for half an hour. Its a tiny thing with a hollow leach and no battens but it has fairly good shape and pushed the boat along at about 5 knots in 15 knots of wind on a beam reach. I was pleased to see that it is in nearly new condition. With the 140% jib set, the boat came alive and we drove upwind with the apparent wind angle at about 40 degrees and about 7.5 knots of speed. Later, as we bore off to a close reach, the speed increased to about 8. Easing sheets a bit more, we put the boat on a beam reach and saw 8.5 on the knotmeter. Bearing off further brought the wind on the port quarter and our speed dropped as we expected. At all times the helm was light and well balanced, and perfectly responsive. Sailing back toward the marina the wind fell to about 5 knots as we approached the marina entrance and the boat ghosted along very nicely. I rolled up the jib and fired up the engine, then furled the mainsail just before entering the marina. All almost too easy. Our berth is near the head of the gangway and the fairway is narrow so its a tight turn into our downwind slip but the boat maneuvered easily and we made our first landfall perfectly.

Having designed, built and sailed a number of racing yachts, I expect my boats to perform well. There is no need for a cruising boat to be a slug in terms of performance or handling and the B423 meets my expectations. I struggle with the idea of in-mast furling. I prefer the strength and simplicity of a full battened main and slab reefing and will likely convert this rig. Other than that, were very pleased with the boat.

Do you find information about Boat Plans And Kits are you looking for? If not, below may help you find more information about the Boat Plans And Kits. Thank you for visiting, have a great day.

Read More..

Wooden Boat Plans Australia | Bulkhead 4 and First Gluing Disaster

Wooden Boat Plans Australia

Jeezum Crow.

First, Ive been having problems on the employment front that has been keeping me out of the workshop. Today, Im feeling good, confident, its raining, Ive got nothing else going on, so I roll into the shop and quickly pound out the framing for BH4. Then, I decide to start my first gluing.

Holy Baloney, what a disaster the whole thing turned into. First, I cover most everything with plastic. I set up my pumps, prime them, get my yogurt cups, my ziploc bags to deliver my epoxy to the wood Storer-style, etc etc etc. I got medium speed epoxy, so Im feeling pretty good and I go ahead and throw in a mess of pumps to the appropriate 2:1 ratio for the "Marinepoxy" brand that Im using. I decided to start out as clean as possible with the Duckflat method mentioned on Storers website, ie. mix everything in the ziploc bag. So I pour in the resin and hardener, I "massage" the bag to mix, then I start dumping some silica into it. For this part, I placed the bag over a yogurt cup. Interestingly enough, the level of epoxy in the bag continued to get lower and lower as I mixed in silica. A hole mysteriously appeared at the bottom. If this was a self-inflicted hole or a heat-inflicted hole, I dont know. Whilst I was investigating the bag dropped into the cup. At this point the mix just freaking took off temperature wise. "Whoa Nelly!" Batch One, done. I sat it aside and kept an eye on it so it didnt combust on my workbench.

Discouraged but not out, I mix up batch Two. This time, screw it, Im mixing in a cup, and Ill pour into a ziploc bag. The mixing goes well, I dump in the silica, that goes well. Its thick, but not super thick, definitely not peanut butter thick, but the temperature was starting to rise, and I wanted the epoxy delivered on the wood before it took off like the previous attempt. So into the bag, I cut the corner and that stuff just started pouring out all over the place. Then the bag got super hot, I dropped it, kicked it aside and starting grabbing the top and bottom frames for BH1. I placed them accordingly and clamped them down, but they started swimming all over the epoxy and wouldnt sit still. Epoxy was oozing out of every seam all over the place, I was watching two batches now for tell-tale smoking and potential combustion, and I was worried like the dickens that my frames were going to set akimbo.

Son of a bitch! Everything is somewhat quieted down now, and things are positioned somewhat where I want them, but not as perfect as I imagined. Im not down with the ziploc bag idea with the speed at which the epoxy starts to hyperventilate. Ive got to spread it over a larger area to mix and then either pour into a bag or distribute it over the surfaces with a different method. Im going to try the sidearms tonight just for fun, but after I calm down.

Edit: Some ideas on gluing better.

Mark the centerlines on the top and bottom frames to line up with the centerline on the BH in case everything goes to hell in a handbasket and the sidearms are removed.

Mix smaller batches, as in 2 pumps to 1 pump. Just keep it small and work from there.

Do you find information about Wooden Boat Plans Australia are you looking for? If not, below may help you find more information about the Wooden Boat Plans Australia. Thank you for visiting, have a great day.

Read More..

Boat Plans Aluminium Australia | Scout shakes off wintertime on Squam Lake

Boat Plans Aluminium Australia

Note new floorboards! Port Orford Cedar.  All class.  Two large stowage compartments, room for flotation, and foot stretcher when rowing.  More on that later.

Do you find information about Boat Plans Aluminium Australia are you looking for? If not, below may help you find more information about the Boat Plans Aluminium Australia. Thank you for visiting, have a great day.

Read More..