Boat Plans And Kits | The new boat the design and the first piece of ply cut

Boat Plans And Kits

Long Steps, the build has begun.

I’ve four frames drawn, the stem, and the spine for the forward section, the mast box and some of the detail around the “cabin”.

The drawing is progressing in my “spare time” as I’ve other jobs to get completed before I’m really free to get on with my own project, but I need a break now and again and wanted to get started on “Long Steps” so the overall timeline does not become impossible.

To give an outline of “the project”.  I have thoughts that as the numbers on my birthday cake are getting alarmingly large, its evident that if I am to have that life defining adventure then I’d best get on with it.

A second motivator was an article in the newspaper last year that described the adventures of a young woman who’d kayaked alone right around New Zealand. It took her a year to cover the distance of around 2100 sea miles, with a few of breaks along the way. What an adventure, she’ll remember that forever.

I’m not quite as ambitious as that, but to get around the North Island is workable.

That’s about 1300 nautical miles, only a little less than the distance  around the British Isles, or the distance from San Diego to Seattle. About, don’t quibble over the odd mile or three.

In an open sail and oar boat. Mostly open anyway.

The circumnavigation of Te Ika a Maui ( North Island of New Zealand)  has some challenges, I’m planning to try local voyages first, and have put a lot of thought into the design,  so, below is a pic of the working drawing.

She’s 5.520 metres long, 1.660 wide, I’d expect a dry weight of around 220 kg.

That’s 18ft 6in x 5 ft 5in x 460 lbs.

Sail area 13.5 sq m / 145 sq ft.

One of the “interesting” things about the planned voyage is that there are at least two long stretches with either bar harbours with prevailing onshore winds or no shelter at all, even in favourable conditions these two stretches of coastline could take up to three days to cover so nights at sea have to be provided for.

Shallow draft is a must, there are some shallow river harbours in some places, but much of the course will be in very open waters, so this is to be essentially a blue water capable boat.

Now I’ve mentioned this to people who’ve banged on about Shackleton and Bligh, but I’m not that tough, so safety, self reliance in emergencies and a modicum of creature comforts are all part of the design brief.

What I’ve done is to take the midsection of the very successful SCAMP design, with its high up bouyancy, sheltered “veranda”, self draining cockpit and water ballast.  The same offset “board” and lying down space is there, along with the massive dry storage that the little boat offers.

This is fitted into a hull shape similar to that of the “Walkabout” design, that boat is very fast under sail, rows well, is easy to right if capsized, and is a very good load carrier.

The ducks and batten marking the curve of the stem.

I started the build today, drew out full sized and cut the stem and spine, cut and glued the doublers around the stem, cut and finished a stack of cleat material and sanded the whole lot so they’re going into the boat almost completely “finished”.

The first cut, thats a Makita 10.6 volt cordless circular saw, nice tool, very accurate, light and easy to use. Its great on plywood up to about 12mm.

The spine, stem, and mast box support will have B#1  B#2 and B#3 slotted over it egg crate style.

The jigsaw is a Makita 4200 BV, Ive had it for over 30 years and its done a huge amount of work.

Good machine.  As is the Japanese saw, wouldnt be without either of them.

Doublers cut out, the edges radiused with a router and all glued up. Progress already!

Tomorrow will see B#1 and B#2 cut out, I expect to be putting the whole lot together on the building frame in January, I have to extend the floor in the boatshed, plus have an adventure in the Straights of Magellan which will soak up a few weeks around the end of the year.

Plus I still have to get some work done.

But I’ve started. The boatshed / workshop is not empty any more, the symptoms of empty workshop syndrome are under control again.

Do you find information about Boat Plans And Kits are you looking for? If not, below may help you find more information about the Boat Plans And Kits. Thank you for visiting, have a great day.

Read More..

Boat Plans Wood | Readership a thank you

Boat Plans Wood

I’ve been running this blog now since January 8^th2011. For a while it was an on and off thing, not regular, or much of a priority, but of late I try to find something of interest about Thursday each week so you’ll all have something to read.

Its worked well, not a lot of “followers” but there are plenty who just come and read now and again, the stats column that we bloggers can access shows where the readers come from and which posts pick up the most page views, and that enables me to see what subject matter is of interest.

A month ago, I was thinking that I might make it to 200,000 page views total by the end of the year, and thinking that was good going, and it is for a lot of bloggers so I was pretty happy with that.  But with a comment or two about the new  “Saturday Night Special”,   “SEI” and “Long Steps” designs there has been a considerable upturn in readership, and we rocketed past the 200 K page views total and are now close to 205 K and booming along ( so to speak).

Its gratifying that there is so much interest, and I thought that I should thank you readers for your interest and your patience when a post is late or missed.

It’s the readership that makes this worthwhile, it makes me feel as though I’ve friends everywhere, thank you, all of you.

An example of a relationship that has grown without having met him, is this photo from Steve Earley who sails his Pathfinder design "Spartina in the Chesapeake Bay and North Carolina area, hes a particularly good writer and his stories of cruising in that area are a wonderful tonic when, he being in the northern hemisphere summer I read his tales in the depths of my winter.

Hes done a nice job of Spartina, and here he is out enjoying her.  Nice one, thanks Steve, I do hope well meet up sometime.

Steve Earley photo. Thanks Steve,  now isnt that a great picture!

Do you find information about Boat Plans Wood are you looking for? If not, below may help you find more information about the Boat Plans Wood. Thank you for visiting, have a great day.

Read More..

Boat Plans Canada | Buying the rope for the new boat

Boat Plans Canada

Well, we’re past the spring equinox, so its autumn for a lot of my friends in the northern hemisphere, the best time of year many tell me.  We’re into spring here, warmer, more sun, and the orchards and fields are covered in flowers. 

It’s a lovely time of year, while there are still stormy days to come the promise of summer is very evident and it’s a real incentive to get on with getting boats ready for the season.

I’ll have to haul the ship out this summer, its three years since she was antifouled and the topsides need painting, so I’m buying sandpaper, getting all the gear ready and will be all ready and prepared when the time comes.

George and Pam are getting some new steelwork done on the old slipway cradle at the Whangateau Traditional Boatyard and if that’s all done, that’s where I’m going.  I’d rather that they had the bucks than the corporate that runs the local marina.

I went out to day and happened past “Quality Equipment” in Glenfield on Aucklands North Shore. They’re rope manufacturers, and have a “rope shop” which is open to the public.  The prices are very very good.

Leon is the man there, good guy. 

So, with rigging SEI in mind, plus some replacement  ropework needed on the good ship May, I stopped in and came out with a 100m roll of 6mm yachtbraid for halyards and controls, and a 100m roll of 4mm polyester solbraid for reefing lines on the smaller boat.

Yes I’ll have lots left over, but there will be other boats, and buying this way cost about $180. (US$113), That’s a lot of rope for the money, way less than the price the “yotshops” sell at.

Yes they do cut lengths although the best way to buy is a full roll. (Split it up among you and your friends). They’ll ship to you as well. (within NZ that is)

www.qe.co.nz

Email Leon at   leon@qe.co.nz   Tell him I sent you, it might help my discount next time I’m in there.

 Lots of "string", in imperial measure about 325 ft on each. Ive already got the mainsheet on another roll bought for a boat a while back.  I keep a fair inventory, some people see my shop as being a ships chandlery in itself, I suppose that theyre right, except its one with only one customer.

My next stop was not such a happy one.  I’ve a Bosch GEX 125 random orbital sander, its probably 15 years old now, done lots of work, had a couple of bearings and a new set of brushes, and while effective enough is not my favourite tool. But I because I have it, I use it.  
I generally have fine paper on that and coarser paper on the Festool Rotex which IS my favourite tool of that type. But its worn out the velcro on the pad, so I went to the Power Tool Shop in Wairau road, yes they had one in stock, yes sir here it is.  That will be $89 thank you.

It should have been wrapped in gold leaf!

The tool is not worth that,  so the Power Tool Shop still own that part, and unless something changes that’s the last Bosch tool I’ll own.

I did though manage to find a pair of oars at a deal that was not a lot more than the cost of enough high grade lumber to make a pair.  theyre heavy and a bit clumsy, the usual off the shelf ones, but with some effort with a sharp plane and spokeshave theyll be good.  

2.4 m oars. When buying like this I regard them as partly shaped blanks. I take care with the grain orientation of the shafts, and try to ensure that the pair are as evenly matched as possible although 8 footers are not commonly stocked now, most being bought for yacht tenders so are little 6 ft 6in ones, thats way too short for SEI.

Ill be running a "wot I did to these oar blanks" in a future blog, youll hardly recognise them when I finish with making shavings.

Time to go and paint the mast for SEI, she’s looking good.

John W

Do you find information about Boat Plans Canada are you looking for? If not, below may help you find more information about the Boat Plans Canada. Thank you for visiting, have a great day.

Read More..