Tampilkan postingan dengan label trimmed. Tampilkan semua postingan
Tampilkan postingan dengan label trimmed. Tampilkan semua postingan

Plywood Boat Plans Australia | Bottom trimmed centerboard trunk and bat house!

| 0 komentar |

Plywood Boat Plans Australia


Today was a productive day, the boat went upside down and back again.



My friend Peter ambled over with his router. This, combined with a flush-trim bit for the router, is a fabulous tool at dissolving the extra overlap left over from the over-sized bottom. It was either going to be a hackfest at sawing/planing it off, or this. The router was mucho easy to use, I cleaned up the enter boat in mere minutes. It left a little lip, which was cleaned up by my handplanes. Long strokes parallel to the boat to get it close, and then the smaller block plane held at an angle to the hull to get it finally flush. This took longer but was enjoyable work. The boat got dropped once, and it was not any worse for the wear.

The centerboard trunk components are also all glued up, but in two pieces. They will not be glued together until the daggerboard is complete, and then I can appropriately take the down the spacers inside (made from daggerboard jetsam, hence same width pre-finishing) to match the daggerboard, plus 2mm for a cozy fit. The daggerboard is being worked on on the side... I think I have a tempestuous relationship with the board and Im taking it slowly.


Peter, while he was over, made a three chambered bat house for his own house. Hes hoping to attract a small colony of bats to summer with him in his moist woods. One brown bat will eat 500-1000 mosquitoes an hour (yes, read that again) and a large bat house could contain tens upon tens of bats if not well over a hundred. Thats a lot of mosquitoes that are going to bite the dust. Additionally, bats eat truckloads of insects that attack farmed crops, help in seed dispersal and some species can be key in plant pollination. Bats do not equal gross, bats equal important. In New England (and spreading south!) we are afflicted with "White nose syndrome" which is hacking away at our bat population. The more bats we get, the better off we all are.

Each chamber is 3/4 of an inch. There will be a plastic grated landing zone below the chambers. The box will be painted a dark brown, and affixed on his house. They like it hot, and hot it will get. Bring on the bats!

Do you find information about Plywood Boat Plans Australia are you looking for? If not, below may help you find more information about the Plywood Boat Plans Australia. Thank you for visiting, have a great day.
Read More..

Boat Plans Arch Davis | Rudder stock design rudder 2 daggerboard shaping

| 0 komentar |

Boat Plans Arch Davis


WELL

Informative day today as I peddled my rudder stock idea over at Mr. Storers forum.

There was enough persuasion action going to keep me going with the plans in term of a backless rudder stock with a daggerboard rudder.  However, I really want to be able to ditch the tiller and leave the rudder installed on the transom.

I came up with this idea:


In this plan, the rudder stock stays exactly as the plans stipulate, except I add on 15mm at the top.  This provides an area to attach a cleat (blue).  Then theres another below it (blue) and the tiller-- which is two pieced-- cradles the rudder stock.  Bolts run through the cleats into the spacer, and the tiller which slides between the cleats is held in place with a pin.

Storer warns that the torsional forces on the tiller could tear it apart, Im hoping that between the three cleats bolted through the spacer, and a bolt higher up on the tiller (not shown) to keep it together, I should be ok.  Time will tell.  I am almost positive this is the model Im going with, unless I get overwhelming evidence otherwise.

In other news, I finished rough shaping the rudder and daggerboard. 


Nice.

Do you find information about Boat Plans Arch Davis are you looking for? If not, below may help you find more information about the Boat Plans Arch Davis. Thank you for visiting, have a great day.
Read More..