Boat Designs And Plans
The transom is ready for gluing. I spent mucho time preparing the top frame last night, I cut it wide with the jigsaw and then sanded it down to match the ply, so this took quite a while. I was being cautious. Everything fits nice and tight and perfect. I am pleased with the result of taking my time with this important element.
AND THEN
I screwed up. I was cutting out the hole for the tiller. I carefully plotted everything out, carefully cut everything out, sanded smooth and inspected for variations. Along the top cut, I noticed I had ever-so-gently strayed "north" and my top cut was not as true as my bottom cut. "NO PROBLEMO" I muttered, whilst grabbing the jigsaw firing it up. "Ill just trim it straight out easy peasey! The fact that maybe the power tool wasnt the best idea didnt cross my mind and I proceeded to venture boldly north now, as opposed to gently stray. goddammit. Now the radius of the corner doesnt match the width of the hole, the top cut is wobbly and not even parallel anymore, and Im super scared to keep cutting to get it straight, because even with a jig clamped down for the jigsaw, I wasnt getting a straight cut. So Im leaving my wobbly, diagonal, cut as a two part lesson: a: SLOW DOWN. b: Its OK to screw up. Im owning up to it, and Im walking away from my almost-but-not-quite perfect transom.
Tomorrow, I will do the first gluing, and stay tuned for some exciting new boat developments!
Do you find information about Boat Designs And Plans are you looking for? If not, below may help you find more information about the Boat Designs And Plans. Thank you for visiting, have a great day.
0 komentar:
Posting Komentar