Plywood Boat Plans | On the road

Plywood Boat Plans

Ive been at work, on the road for a bit now, with only minimal time (36 hrs or so) at home... just enough to catch up on chores, errands, do laundry, sleep, eat my one healthy meal of the week, and go back out the door again.

Its teeth grindingly frustrating. The clock ticks and still so much to do...

Do you find information about Plywood Boat Plans are you looking for? If not, below may help you find more information about the Plywood Boat Plans. Thank you for visiting, have a great day.

Read More..

Yacht Boat Plans | Mazatlan to La Paz

Yacht Boat Plans

Our week in Mazatlan flew by ever so quickly. This was due in part to the repair project I spent some time on but mostly because whenever I wasnt working on the boat there was lots of fun to be had. One evening we did Mazatlans version of PVs Southside Shuffle, only here there was a lot less art and more wine tasting. On a couple of days we simply strolled along the malecon and up the streets to the Plaza Machado in the heart of Old Mazatlan. Like all cities in Mexico, the public transportation system is excellent, with buses, taxis and other forms of transportation easily available. In La Cruz we often traveled by "collectivo" which is a small van with lots of seats, usually crammed full of people. Its not exactly fun, but they got us pretty much where we wanted to go very inexpensively. In Mazatlan they have a unique and much more fun mode of transportation called "Pulmonias". These are small open topped cars with air-cooled Volkswagen engines that are everywhere in this town. They are cheaper than a taxi, much less claustrophobic than a collectivo and simply fun to ride around in.

Pulmonia. 

"Pulmonia" means pneumonia in Spanish.  When these open cars first showed up in town back in the 1960s, the local taxi drivers were outraged and warned people not to ride in them because they would catch "pulmonia", so people started calling them Pulmonias and the name stuck.

Iguanas are a fact of life in Mazatlan. Around the pool at  El Cid they would gather around people who were eating and wait, with prehistoric patience for a handout.

In the past, whenever weve stayed in Mazatlan, it was at Marina Mazatlan. Its a nice place as marinas go, but we were very happy that we chose to stay at Marina EL Cid this time. It is connected to the El Cid resort, so it also has beautiful swimming pools, private beach, an excellent restaurant and a staff that is always eager to assist you with every little thing. We had a great time basking in the luxury of the place.

Looking east toward Isla Cerralvo in the predawn light.

Just before the sun rose over the horizon a pod of dolphins passed by.

Pelicans roosting on the rocks at Puerto Balandra

After that week of luxury, and with the boat all put back together, it was time to say adios to Mazatlan and head for La Paz, the gateway to Sea of Cortez cruising grounds. So on April 8th, Finisterra cleared the breakwater under a sunny sky and an easy ten knot breeze out of the southwest, perfect for a close reach on port tack to the northern tip of Isla Cerralvo. But within half an hour the wind began to veer and before long we were headed north-northeast instead of our desired course of northwest. We sailed in this direction for about ten miles, basically skirting the coast north of Mazatlan, then tacked.  This put us on a course about 40 degrees south of where we wanted to go, but by evening the wind had veered far enough that we were back on course on starboard tack in about 15 knots of wind. We sailed this way for the next 120 miles of the 230 mile passage. Then the wind disappeared and I started the engine.  We motored the rest of the way in three to eight knots of breeze out of the northwest.

Pelican in La Paz

After passing Isla Cerralvo we were approaching the San Lorenzo channel, which separates mainland Baja from Isla Espiritu Santo around 0300. I slowed down to about four knots as we reached the entrance to the channel. Its fairly narrow and there was a lot of ship traffic passing through it, and I didnt want to arrive at our destination of Puerto Balandra in the dark. We transited the channel around 0700 and by 0800 we were anchored in the southwest corner of Balandra and settled back to enjoy a couple of days of snorkeling, sunning and just relaxing. It was hot during the daytime but at night the Coromuel wind showed up, bringing cool air in from the Pacific which lies not far to the west.

Nesting gull

Our next stop was Marina Costa Baja, which lies at the entrance to the channel leading into the inner harbor at La Paz. This is a 5 star resort with a marina.

"Galeocerdo"

The bulwarks fold outward on both sides of the hull to provide more lounging space on deck. There are lots of videos of this boat on youtube.

In a luxury marina full of large and very large mega yachts, Galeocerdo, a Wally 118 motor yacht stood out. Its like a Ferrari of boats, with a top speed of about 70 knots and a price tag of $30 million. With its dark, stealthy gray/green paint and styling reminiscent of an F-117, it looks kind of dangerous. I dont know why anyone would want to spend $30 million on a boat like this, but there you have it.  Galeocerdo is the scientific name for Tiger Shark.

F117

Tomorrow well head north to some of the beautiful coves of  Isla Espritu Santo and Isla Partida. This area is a UNESCO Biosphere Reserve. Were looking forward to some awesome scenery and snorkeling.

Isla Partida, on the left is separated from the larger Espiritu Santo by a narrow channel.  Well anchor in Ensenada Grande, the large cove near the left end of the islands.

Do you find information about Yacht Boat Plans are you looking for? If not, below may help you find more information about the Yacht Boat Plans. Thank you for visiting, have a great day.

Read More..

Dinghy Boat Plans | Banderas Bay to Mazatlan

Dinghy Boat Plans

Finisterra finally sailed from La Cruz around 0900 on Sunday, March 30th bound for Mantanchen Bay and then Mazatlan. It was a beautiful morning with a light offshore wind early and the promise of a nice beam reach to Mantanchen in the afternoon. We motored out around Punta de Mita and turned northward in almost no wind, but by noon we had enough wind to sail. We hoisted the main and set the jib and settled down on the reach to Mantanchen in about 10 knots of wind. It was looking like a beautiful day-sail all the way.

Mantanchen Bay sunset

Shortly after we got the sails set and trimmed, I heard a strange creaking noise coming from somewhere down below. This was a new noise, not the typical creaks that I was accustomed to. I searched around the boat in all the likely places that creaks might come from, but couldnt find the source of the noise until I opened the starboard lazarette hatch. When I looked down into the compartment I noticed that the bracket for the autopilot ram was moving back and forth in an unusual manner. Then I realized that the bulkhead was flexing and the joint where I assumed Beneteau had spliced or scarfed together two pieces of plywood to make the aft bulkhead was not a joint at all. It was not lapped or scarffed, or even glued together. Nope, Beneteau apparently saw fit to just butt the two pieces of plywood together without the benefit of any adhesive or mechanical fasteners. Then whoever installed the autopilot ram drilled the mounting holes less than a quarter inch of the edge of this imaginary joint. The bracket was mounted with massive 7/16" bolts and a stainless steel backing plate so it looked like a proper job, but looks can be deceiving.

By mid-afternoon we were gliding into Mantanchen Bay and got the anchor down in about eighteen feet of water three quarters of a mile from the beach, which I hoped was well beyond the range of the no-nos that live around here. Then we had a decision to make: We could go back roughly 50 miles to La Cruz or continue on to Mazatlan, another 130 miles north from here. After looking at the weather forecast we decided to press on to Mazatlan. The wind would be on the nose the entire distance but it would be light most of the way. We would be motoring into it and that would put the least stress on the wobbly bulkhead.

Mountains behind Mazatlan at dawn.

To put this little problem into perspective, we were in no danger and the worst that might have happened to us was that we might have to hand steer if the bulkhead failed completely, which was very unlikely. But it certainly annoyed me as a boatbuilder that the boat was built in this manner. And of course the problem needed to be fixed before we ran into any real weather, which is always a possibility in the Sea of Cortez.

View from the aft side of the bulkhead.  When I replaced the autopilot ram back in 2012 I assumed this joint was lapped but its not.

View from the forward side of the bulkhead.

The repair was easy enough. I went over to Marine Services Mazatlan, which is located in the shipyard next to Marina Mazatlan and had them cut out some plywood reinforcements that I bonded to both sides of the bulkhead with WEST epoxy. Once the epoxy cured it was a simple matter to reinstall the bracket and ram.

Both sides of the bulkhead were sanded and prepped.  

Plywood reinforcements bonded in place. The screws were used to clamp everything together while the epoxy cured.

Bracket and ram reinstalled and ready to go.

With the repair completed, we were able to spend some time around the pool at the marina and wander around the beautiful city of Mazatlan. In a few days well head northwest across the Sea of Cortez to La Paz.

Do you find information about Dinghy Boat Plans are you looking for? If not, below may help you find more information about the Dinghy Boat Plans. Thank you for visiting, have a great day.

Read More..

Boat Plans Bruce Roberts | Gluing on Front seat

Boat Plans Bruce Roberts

YO.

Today I glued on the front seat. I also epoxy sealed the rear watertight compartment.

Im just going to let you know that today was the most productive, least disastrous, most efficient gluing event yet on this boat. Still some mistakes, but NOTHING like gluing the boat together or putting them bottom on. Which makes me worried that I screwed up or was deficient on the most important parts of building, but alas, what I have, I have, and well see if she sinks or swims. Hopefully, she soars.

Anyway.

When I realized that the garage was holding steady at 44 deg. F (7 C) I decided to get with some gluing. I mixed up about 3 pumps of resin and the corresponding hardener and dumped in a bunch of thickener, and applied it to my pre-coated seat cleats and BH1 + 2.


I just really dumped the thickener into the mix. I figure this: If I have a tight fit, less silica, if I have a loose fit, more silica for a more filling mix. It took me this long to figure it out. This, with some valuable information from the Storer forum has helped me make better epoxy mixes. One rule to follow: Pulling the mixing stick out of the glue, if the point droops, its good for gluing, if the point stands tall, its good for filleting. Variations apply to temperatures, however, as you will soon find out.

After I applied the glue, I realized it was stiffening up because of the cold temps in the garage. This is not conducive to smearing and filling holes. I grabbed a hair dryer and tried to warm it up the best I could. Using this information that is stiffens, I kept my fillet mix a little thinner than the point "standing tall." I applied the seat and it dropped right in nice and tight. I threw some bricks on it to weigh it down, and took a few pictures from inside the compartment to see how I was faring with the glue. Here, were looking towards the bow:


As you can see, good squeezage on the middle cleat, not so good up around the bow. I added some bricks. I DID have good squeezage from the sides of the seat upwards, so I know I have good contact. Im not bothered I dont have excess spilling off the side of the cleat. Next up was some fillet work. I was using a squeegee and then a PLASTIC SPOON that did absolute wonders to throw down a sweet sweet fillet. Nice and clean. I kind of eyeballed what looked good to me, and this was the result:


I think thats sufficient. Heres the forward seat glued in position with the forest of bricks:


Im pretty happy with the result. However, after I was done I wandered into the kitchen where my beautiful wife asked me what I did.

Wife: So howd it go?
Me: Oh it went great, Im the man, Im the next Herreshoff, I glued on the front seat. I am The Man.
Wife: Great! Youre great. Im so glad I married you! Thats the watertight compartment, right?
Me: Yup! The seat forms the forward watertight compartment!

Then I wandered downstairs to get a beer and realized... Son of a GUN... Do I have any gaps between the plywood seat and BH1 that forms that watertight compartment? OH NO! Look at this picture again, pay attention to BH1 starboard side and glue amounts:


Now look at this picture snapped from within the mast-well between BH1 and 2 looking forward on the starboard side!


Gaps! And while I dont think they run through, there are photodocumented gaps on the inside of the tank as well. Dammit.

Im too tired and whooped to worry about it tonight, I will make sure to squeeze some epoxy in there in the future. Its also a strange spot to get to, I have to get into the boat to make this one work, and shes up on buckets, so it will have to wait.

Thank you, wife.

OH YEAH, heres my heater tent. I can keep it 56 F (13 C) in there with my little space heater.



Do you find information about Boat Plans Bruce Roberts are you looking for? If not, below may help you find more information about the Boat Plans Bruce Roberts. Thank you for visiting, have a great day.

Read More..

Boat Plans Skiff | Road Trip Guadalajara

Boat Plans Skiff

After the Banderas Bay Regatta we were ready for a different kind of fun so we joined our friends, Ed and Connie for a road trip up-country. We drove about a thousand miles, or perhaps it just seemed like a thousand miles throughout west-central Mexico. Here is a list of the notable towns and cities we visited on the trip:

Tequila
Guadalajara
Tlaquepaque
Guanajuato
San Miguel de Allende
Morelia
Angangueo
Patzquaro
Chapala
Mascota

Thats a lot of traveling, so for this post Ill focus on Tequila and Guadalajara.  Ed has a car here in Mexico and was kind enough to do nearly all the driving so I was free to just watch the world go by from the backseat of his Isuzu Rodeo, and occasionally hang on for dear life as Ed demonstrated his high speed driving prowess on the unpredictable roads of Mexico. Actually, we only stopped in Tequila for some beer and tacos along with a couple of souvenirs from the Jose Cuervo distillery. Anyway, we blew into Guadalajara and took rooms at the beautiful old Hotel Morales in downtown.

After the high speed run into town, I was more than ready for a stiff drink and we were fortunate that the hotel had an excellent restaurant with a fairly good bartender. The next morning we began our tour of this sprawling, gritty, bustling city. With about four and a half million residents in the metropolitan area, Guadalajara is the second largest city in Mexico and is a major center of commerce and industry. It is also the capital of the state of Jalisco. It has a long and colorful history dating back to the 1500s, and if youd like to know more about this fascinating and diverse megalopolis, feel free to check it out on Wikipedia.

Like most of Mexicos cities, Guadalajara is full of churches, and we wandered around several of the biggest ones, taking photos and people-watching. One thing I have noticed in all of the churches and cathedrals Ive visited in Mexico is the strikingly beautiful architecture and sculpture combined with a musty sense of dilapidation inside them. Outside, soaring spires and magnificent bells. Inside, cracked icons and peeling paint. Never a fan of organized religion, these aspects of the churches seemed to me to be a fitting metaphor for the Church itself.

Guadalajara is also a city of music. In fact, it would be fair to say that Mexico is a country of music because almost everywhere you travel in this beautiful country, someone is strumming a guitar or singing. This is a happy country in spite of all the troubles it confronts. I think the US could learn something about enjoying the simple pleasures of life from Mexico. Anyway, Guadalajara is said to be the birthplace of Mariachi music, that distinctively Mexican musical style. We were treated to lots of this kind of music but we also experienced a wonderful classical music concert in the plaza a couple of blocks from our hotel as well.

Atrium in the Hotel Morales

Central Square with the obligatory church in Guadalajara 

Guadalajara is the commercial center of Mexico but it is also a city of music. 

Cellists 

Violinists

Guadalajara is said to be the birthplace of Mariachi music.  This sculpture is a tribute to the genre.

After a couple of days in the city we were ready to move on. Our next stop was the town of Tlaquepaque, which is known for its artisans and craftsmen. I found it to be a bit too touristy for my taste and Ed agreed, so while the women shopped we set out on a mission to find some decent margaritas. Alas, we failed and had to settle for some watery concoctions that the waiter claimed were margaritas, but tasted like Fresca and lime juice. With that we piled back into the car and headed for the beautiful city of Guanajuato.

Do you find information about Boat Plans Skiff are you looking for? If not, below may help you find more information about the Boat Plans Skiff. Thank you for visiting, have a great day.

Read More..

Boat Plans And Patterns | Road trip Guanajuato

Boat Plans And Patterns

We left the town of Tlaquepaque in the early afternoon and arrived at the outskirts of Guanajuato around 4:00 pm. Its not a very large city, with a population of around 154,000 in the municipality, but it is tightly packed into a narrow and steep-sided valley. The original town was built on the banks of the Guanajuato river way back in the 1500s.  During the rainy season the river often overflowed its banks and flooded the town. By 1905 the place had been flooded 68 times. The federal government then stepped in and rebuilt the city on ruins of the old town, and in the process created a system of tunnels beneath the streets of the new city. Some of these were based on the course of the river and some were dug out of hard rock. Since the town was originally the site of some of the richest silver mines in the world, there were plenty of miners around to do the work. The result is a truly unique city with most of its thoroughfares underground. It makes a lot of sense and for a few moments I tried to imagine what LA would be like if its freeways were all underground.

Aside from its network of tunnels, Guanajuato is famous for its confusion of narrow streets and "callejones", which are really just alleys too narrow for motor vehicles. We were unprepared for this and immediately got lost searching for our hotel. Eventually a local climbed onto the back of our car and, shouting orders from the rear bumper, guided us through a couple of tunnels and bunch of twisty little streets to the staircase that led up to the Hotel Chocolate, which was perched on a steep hillside at the top of a row of tiny hotels and restaurants. It was sweaty work lugging our baggage up what amounted to about nine flights of stairs to the hotel lobby, then to our rooms which were three flights further up. But the view was spectacular and we enjoyed our brief time there.

Hotel Chocolate. The views from this quirky hotel were splendid.

View of the Jardin Union (Union Garden)  from the Hotel Chocolate. This is ground zero for the incredible festivities that go on every night. With lots of loud music and throngs of people out until around 4:30 every morning, its a tough place to get a good nights rest.

We could only stay one night at the Hotel Chocolate so we moved down to the Hotel San Diego, which was across the street from the Jardin Union. We could see all the festivities from our third story balcony and of course it seemed like the band was playing right outside our window.

The narrow streets and classic architecture of the city give it a distinctly European flair that was an enjoyable change from the more modern and Mariachi flavored Guadalajara. Because of the confusing streets and tunnels, and the fact that the car was parked miles from our hotel, we hired a guide to give us a tour of the city. This turned out to be a great way to see the place. With the four of us, the guide and a driver in a van, we visited many interesting places and quickly got acquainted with the lay of the land. After the tour we were able to explore central G-town without getting lost.

The church bells in town toll every fifteen minutes 24-7-365.

kjhlkh

A pair of mermaids guard the entrance to a home next to the Hotel Chocolate.

Guanajuato Cityscape. The building with the beautiful facade on the left is the University of Guanajuato. 

Main mercado in G-town.

Parrots waiting to be sold at the mercado.

The city of Guanajuato has adopted the classic novelist, Miguel de Cervantes Saavedra. His most famous work is Don Quixote and the city has built a museum in honor of the author and the book. It was interesting to learn about the author, but is was far more fascinating to wander the galleries and see modern artists interpret the the main character of the book, Don Quixote.

A whimsical interpretation of Cervantes Don Quixote.  

A bust of the Man of La Mancha

Pipili became the citys most famous hero when he strapped a large stone on his back as a shield against Spanish bullets and set fire to their fortress way back when Mexico was fighting for independence from Spain. He is everywhere in Guanajuato.

Pipili, the hero of Gunajuato stands guard on a ridge overlooking the city

Guanajuato is by far the most interesting and beautiful city we have visited in Mexico. We would have liked to stay longer and learn more about this fascinating town, but after three days it was time to move on to Morelia.

Do you find information about Boat Plans And Patterns are you looking for? If not, below may help you find more information about the Boat Plans And Patterns. Thank you for visiting, have a great day.

Read More..