Tampilkan postingan dengan label has. Tampilkan semua postingan
Tampilkan postingan dengan label has. Tampilkan semua postingan

Boat Plans Bruce Roberts | The siren song of boatbuilding has lured another

| 0 komentar |

Boat Plans Bruce Roberts


You cant stop what you cant stop.  (Im pretty sure thats Rumi.)  Count Gregoire de Frontenac has realized that boatless man is truly bound like the t-shirt says, and he must escape his shackles with a project that will dominate his garage, pick his pocket, and estrange him from family and friends.  Yay boats!

I ripped this picture of my Goat off his first and only post.

BILTrek2012 was spent mostly doing this.  Note bank of fog.
Good luck to Count Gregoire de Frontenac!

Do you find information about Boat Plans Bruce Roberts are you looking for? If not, below may help you find more information about the Boat Plans Bruce Roberts. Thank you for visiting, have a great day.
Read More..

Wood Boat Plans And Kits | The sail has arrived!

| 0 komentar |

Wood Boat Plans And Kits



105 square feet of dacron goodness!

Do you find information about Wood Boat Plans And Kits are you looking for? If not, below may help you find more information about the Wood Boat Plans And Kits. Thank you for visiting, have a great day.
Read More..

Boat Plans Canada | Transom takes a hit!

| 0 komentar |

Boat Plans Canada


In the course of beveling the bottom edge of the transom, I took a couple of chunks out of the endgrain of the starboard side frame. Then, I head a ***CRACK*** on one pass of the plane. I ripped a sizeable piece of the side frame away from itself. I carefully chiselled off the exposed end, and on another pass from the plane... ***CRACK*** and I took another strip, this one very deep. I can epoxy this all together, but Id just as rather not have the integrity of the wood comprised. I only had one remaining bevel left with an endgrain, and I beveled it with a rasp and then planed the rest to match. Dammit-- This is an amateur mistake! Other amateurs beware!



Take note that I did not break the epoxy bond between the side frame and the transom ply, the surface layer of the side arm remains firmly glued to the ply.

Do you find information about Boat Plans Canada are you looking for? If not, below may help you find more information about the Boat Plans Canada. Thank you for visiting, have a great day.
Read More..

Boat Building Plans And Kits | Portland almost to Seguin Island and back

| 0 komentar |

Boat Building Plans And Kits


Not my picture, not my boat
Before we get started on some SeaPearl 21 adventuring in Casco Bay, I want to point out Dave-in-NJs blog about his Goatee Goat Island Skiff "Chivita" and some pretty damn epic sailing he did around New York Harbor.  Its somewhat of a departure from my Goat perched on a wild island in Down East Maine, but it is just as epic, if not more for the sheer stupendousness of that mother of all cities, New York City, and her crazy harbor.  Please see this post in particular.  If your heart doesnt get thumping, you must not like Goat Island Skiffs, and I question why you are here in the first place.

Dave, you go man.  You go.  Impressive.

***

Now for the main feature:

In which SeaPearl Scout and I sail around Casco Bay, meet a squall, and get boarded by fictitious pirates.

Red = Day 1, Yellow = Day 2.  Black = Iron Mizzen usage

I headed out of South Portland recently and met up with a Pearson 30 as she sailed north along the Maine coast, destination Brooklin and WoodenBoat.  I planned to be along for a day, maybe two.  The first nights destination was either going to be Damirscove Island or Seguin, depending on distance travelled.  I thought I could probably make Seguin via Half-Way Rock, but Damirscove was probably out for me due to the distance and my energy level.

The weather was fine, with a remote chance of thunderstorms, and calm winds gave way to a beautiful stiff breeze of the kind that you can only really find on salt water.

Scout moved along smoothly and with efficiency. I pushed her hard which means I pushed myself hard, and gave myself little time to eat, drink, pee, or enjoy the sailing, as I was intent on keeping up with the Pearson 30 (which I did, but jeez... enjoy the ride already, right?)

Blowing out to Half-Way Rock with nice water and a good breeze!

Pearson 30 
 After I had passed Half-Way Rock (no pictures, sorry, but lots of seals!) it started to become blatantly obvious that the slight chance of thunderstorms was going to probably become a very real chance.  In the deeps of my ears I imagined I could hear low-frequency rumbling, even though the sky still looked somewhat innocuous.  Soon however, it was apparent that we were in for a blow.

Trouble brewing
 I cracked down to make as much mileage as I could towards Small Point/Cape Small not in a vain attempt to outrun the storm, but to get closer to the shore so that if things went bad, I wouldnt be miles out to sea.

Behind me, the wall of bruised green and black advanced, with thunder filling the air.  It was on.  My buds in the Pearson 30 became insignificant by contrast.  I hoved-to and started preparations.

Trouble is creeping up on the Pearson 30! Run guys, run!
Battened down.  Small Point in the distance behind me.  Trouble is on its way!
We tied Scout up and towed her behind the Pearson 30, which was actually a mistake.  When the squall hit she sailed on her own, and the skipper had to stay ahead of her.  It would have been far more desirable to hunker down in Scout and ride out the storm with her as it would have been significantly less nerve wracking.  Lesson learned.  When the storm passed the crew of the Pearson decided to make for Damirscove, and I broke off and headed towards Harpswell to a small island on the Maine Island Trail.

The Squall over, I take my leave of the Pearson 30 and sail out of the dark and into the sun.  This was a good feeling.

Wet, but pleased with this particular outcome
 I reached the island after navigating around and over several treacherous reefs (again, yes! 6" draft!) and found that there were few good access points.  I was somewhat chuffed at the description of this particular island as I was lulled into thinking Id have a good beach, but with a stable west breeze, Scout was held perfectly in a small cove with a flat bottom so she could bottom out at low tide.  Exhausted after approx 22 miles of sailing, I ate some rice and crashed in my tent on shore.

Nestled in for the night... or is she?
My view in the morning.  Peaceful.  I am happy!
 I awoke the next morning to *BANG CRASH BANG* and the first thoughts in my tent was:

1. Raccoons are searching for tasty food morsels and ripping things apart
2. Crazy hobo person who probably lives on island is ransacking my boat
3. Pirates (this one bad)

With little fanfare (Im pretty sure I was naked) I went running out of the tent down to the shore and around the corner, where I found Scout slightly south of her original position and bottomed out on a now not-so-flat bottom, her bow pointing skyward, and my booms sliding down to the stern of the boat.  No pirates, but a sorry sight!

It looked steeper in real life.   
When you are waiting for a tide to fix your sorry boat, you might as well make coffee.
 When the tide came back up and floated Scout into position, we hauled back for Portland.  Southbound, I had some of the finest sailing I can recount this year, making significant mileage against the tide with a steady breeze.  There was much hollering and hooting and, as with IAZ,P, lobstermen waved cheerfully as we passed.

Booming home.  
 The wind really picked up and we reefed down continuously as the day progressed, finally putting in at Fort Gorges in Portland Harbor where we waited for the wind to calm a bit so pulling the boat out of the water wouldnt be as dramatic.  Scout happily sat in the small harbor while I read my WoodenBoat and napped on the beach.  This is summer.  This is happy.





Do you find information about Boat Building Plans And Kits are you looking for? If not, below may help you find more information about the Boat Building Plans And Kits. Thank you for visiting, have a great day.
Read More..

Boat Plans Catamaran | Beveling bulkheads

| 0 komentar |

Boat Plans Catamaran


I also recently started beveling my BHs and transom since they are all glued up. Despite my initial fear of beveling, it is quite easy, even for a beginner. I mark the edges of the BH first and draw a line for the bevel, and then on the face that is to be beveled I draw a line connecting the two edge bevels. That way, I have a nice visual of what needs to be planed off. Heres an example:

Heres a side of BH1 all beveled up:


BH 1 and the Transom are easy to bevel because all the frame pieces are on the same side. I am running into problems on BH 2 and 4 because I need to make bevels but cant get my plane to the end of the BH because a frame on the opposing side blocks it. This is frustrating. I glued everything up as I was supposed to, minus the side frames that are added after the boat is glued together (this is me saying to the skeptic: I read the directions and followed them to the T). In retrospect, I feel like I needed to piecemeal construction of the BH and bevel a piece at a time. Heres an example of the problem on BH4:


Above is BH 4, looking along the bottom edge that is to be beveled. The bevel drops from left to right, so the high side is on the left. The side frame in the distance will block the plane from finishing the last section, unless I can get a bevel on the side frame. Then plane should pass over it no problemo. Heres another example but on a side frame now:


So this is looking down the side of this particular BH. I have marked the bevel I need on the side (2mm) with the continuation on that bottom frame. From this perspective imagine the plane is coming down the side of the BH towards you, the viewer. As you can see, it will be blocked by the side frame unless I can bevel that too. I dont know how to easily bevel this so I can bevel the rest.

UPDATE: Someone over at the Storer forum mentioned a few options, of one them being a rasp. I took care of this problem in 5 minutes... my brains just not working today. Theres a reason Im not at work!

Do you find information about Boat Plans Catamaran are you looking for? If not, below may help you find more information about the Boat Plans Catamaran. Thank you for visiting, have a great day.
Read More..