Tampilkan postingan dengan label 4. Tampilkan semua postingan
Tampilkan postingan dengan label 4. Tampilkan semua postingan

Boat Plans Nz | Moving along

| 0 komentar |

Boat Plans Nz


A bunch of small items were taken care of today despite my continued head cold and heavy congestion. Sneezing and coughing and snotting all over my boat was a great experience, really.

Anway, All the BHs are beveled, I notched the top frame on BH3 where the middle 90mm was supposed to have never been applied (room for centerboard case), and I cut and traced out the timber for the stem. I also cut the holes into the BH 2 and 3:


Theyre still rough, I havent sanded them smooth or even yet. You may notice I went for the trapezoidal shape on BH2, this was at first done because I was a little nervous doing circles with the jigsaw a la transom. After I did it, I thought, damn, that looks bad. But then I realized that without the curves I can stuff more equipment (picnic basket, wine, beer) in that forward space between BH1 and 2. So I liked that, but then I waffled back to cutting a bigger hole to get curves. At this point my wonderful wife wandered in as I sat perplexed, and she gushed at how imaginative I was for mixing and matching shapes for the holes and how great it looked.

The trapezoid stays, gentlemen.

Up next:

  • Shape and finish the dreaded stem
  • Cut timber and scarf chinelogs
  • Apply re-enforcement on transom for rudder
  • Cut notches on BHs for chinelogs
  • Coat all BHs with epoxy (I may do this later because Im getting impatient to see the boat)
  • Glue up the sides
  • Touch up with the plane
  • Screw it all together for a dry fit in the garage
  • Freak out as I try to find a warmer place than the garage to put it for the winter so I can work on it.


Do you find information about Boat Plans Nz are you looking for? If not, below may help you find more information about the Boat Plans Nz. Thank you for visiting, have a great day.
Read More..

Boat Plans Nz | Rudder design 4 daggerboard glassing

| 0 komentar |

Boat Plans Nz


After many trips to the hardware store getting stainless steel carriage bolts and machine screws that were often the wrong size, I finally got my rudder box together in some sort of usable fashion.  As my intrepid readers may remember in three other previous posts (search in the month of March), I have been trying to figure something out in order to get my tiller to be detachable.  I went with the final option, illustrated in this post. 

The rudder box is glued up but not glued together.


As you can see, I am wearing my camo Converse sneakers.  Very cool.  The original tiller design calls for the tiller to be permanently attached to the top of the box, where my shortened tiller stock is now-- so originally that would be much longer, but permanent.  This way, I can remove the tiller and leave the rudder in the water, freeing up open space in the boat during quiet times.  I used a carriage bolt with a butterfly nut tensioned by a split washer.  Dont drop it, and carry a spare! 

The spacer is as of now temporary, but I could do one of three things.  I could lengthen the spacer to make it full-tiller length, giving the tiller laminate strength; I could shorten the spacer; I could make two evenly spaced spacers, I could leave it the way it is.  This is yet to be determined.  Heres a closeup for the interested:


Im having some serious problems with my hardware for the rudder, unfortunately.  I wanted a pintle and gudgeon style assembly, but my 1.5" gudgeons are not fitting around my rudder box, even though its 1.5" wide.  Something aint right.  Also, Id have to expand my tiller access hole in the transom to accommodate the up and down motion to get the rudder in and and out.  So Im scraping the pintle/gudgeon idea and Im going to go with the gudgeon/gudgeon idea, as the original plans stipulate.  Which means I have to find some sort of long pin to thread between all of them.  Boo to that. 

Also today Ive been working on my blades.  My rudder got sanded down to the matte finish, and I carefully taped off vertical areas that would run, and applied one last thin coat of epoxy onto one side of the rudder.  Tomorrow, the other side.  I used a plastic spreader, and it went very well, very smooth, and Im very happy with my luscious result:


Youll notice on the left hand side that the leading edge still isnt coated, this was taped off earlier.

Then, off to glassing my daggerboard!  Much like the same for the rudder, except I cut a bigger piece.  I had a lot of runs in my rudder, and I figured this time I would lay the board flat, spread epoxy with a squeegee, and then turn it over, do the other side, and then hang it up. 

So I went ahead and did one side horizontally:


 I thought I was being pretty smart. 

So then I turned it over and did the other side.  Something caught my attention and I looked underneath my board and...

... well I didnt take any pictures because needless to say the whole first side has very neatly peeled away from the board, thanks to Mr. Theory-of-Gravity.  Gravity is only a theory by the way, they should teach both sides in schools so kids know this, because there is lots of evidence that gravity does not exist, but "they" dont want to show you it.  I digress.  Today, gravity was obviously working quite well.  I finished the job at hand, and then hung it up, and re-spread the cloth down.  Fortunately not much damage done, but for my smartness, well, not so smart now.  Here it is all hung up to dry:



Its late, Im still periodically coating the board to get the weave filled, and Im tired.  I timed this one bad.

Thanks for reading!



Do you find information about Boat Plans Nz are you looking for? If not, below may help you find more information about the Boat Plans Nz. Thank you for visiting, have a great day.
Read More..

Boat Plans At Mystic Seaport | Gluing BH 4 and some things I found out about gluing

| 0 komentar |

Boat Plans At Mystic Seaport


Alright, Im a little frustrated at myself right now, because things are coming along nice, but not coming along like I want them too. Everything will be OK in the end, but it wont be as nice and neat as I would like to see, and thats aggravating. A lot of the mess stems from excess epoxy squeezing out and making the seams look all lumpy and dumb. A faster clean-up job before anything even begins to think about setting up would have saved me from having stupid looking frames.

First, Ive been having some problems at work that are pretty significant, and I wasnt as focused on gluing as I wanted to be or could have and that led to sloppy gluing work.

Second, I just dont have wood gluing experience. My epoxy/fiberglass experience is solely focused on my Laser, hull #194, from the early 70s. This boat has hit submerged objects, sandbars, docks, buoys, other boats, etc. at speed. Laser speed. Fast. Rig humming with 2/3 of the boat out of the water fast. Once, it fell off my car... while I was driving. Needless to say, Id just slop some epoxy on and keep going. Now that Im gluing together my wood boat, I cant be as messy, or at least, Id rather I wasnt as messy.

BH1 is messy but will be hidden mostly from view. BH2 is somewhat in view and the frames are going to visible, and its kind of messy. BH 3 could have come out perfect, but it looks messy too because I rushed and didnt STOP.THINKFIRST.NOTSOFAST. BH 4 came out really nice and clean, but the frame is mostly hidden within the rear airtight box, so no one will see my clean job! Dammit! Roar!

So heres a tip to you beginners out there: First, read all you can about epoxy. I have yet to find a nice primer/tutorial on wood gluing for boats, and that would have helped. The Storer forum, my thread in particular could help you out. Second, my biggest mistake in neatness is that I waited for the epoxy to firm up to a putty and then tried to hack off the excess. This is a mistake. This evening I glued BH4 together, let it sit for a few minutes to excess epoxy oozed out, and just cleaned it right up. Presto besto pesto yum done. A nice neat job. Why I didnt think about this 3 BHs ago, I know not.

Do you find information about Boat Plans At Mystic Seaport are you looking for? If not, below may help you find more information about the Boat Plans At Mystic Seaport. Thank you for visiting, have a great day.
Read More..

Boat Plans Wooden | New post!

| 0 komentar |

Boat Plans Wooden


With nothing in it!

Work on the Goat Island Skiff has been temporarily stopped due to a return to work/on the road status.

I have pictures of some work I did just before I left, but they are unfortunately inaccessible at this point in time.  Stay tuned until next week!

Do you find information about Boat Plans Wooden are you looking for? If not, below may help you find more information about the Boat Plans Wooden. Thank you for visiting, have a great day.
Read More..

Boat Plans Canada | Transom takes a hit!

| 0 komentar |

Boat Plans Canada


In the course of beveling the bottom edge of the transom, I took a couple of chunks out of the endgrain of the starboard side frame. Then, I head a ***CRACK*** on one pass of the plane. I ripped a sizeable piece of the side frame away from itself. I carefully chiselled off the exposed end, and on another pass from the plane... ***CRACK*** and I took another strip, this one very deep. I can epoxy this all together, but Id just as rather not have the integrity of the wood comprised. I only had one remaining bevel left with an endgrain, and I beveled it with a rasp and then planed the rest to match. Dammit-- This is an amateur mistake! Other amateurs beware!



Take note that I did not break the epoxy bond between the side frame and the transom ply, the surface layer of the side arm remains firmly glued to the ply.

Do you find information about Boat Plans Canada are you looking for? If not, below may help you find more information about the Boat Plans Canada. Thank you for visiting, have a great day.
Read More..

Boat Plans For A Chesapeake Deadrise | A note on tools

| 0 komentar |

Boat Plans For A Chesapeake Deadrise


A few things on tools that I have found out the past few days.

A japanese pull saw is awesome. I doubted it at first, hemming and hawing for months before getting a small one-sides saw. A FANTASTIC PURCHASE. Versatile, sharp, easy to use, and precise. Practice first, because youll saw through something important quickly and without realizing it (trust me).

My random orbital sander was a $9.95 DEATH DISASTER I purchased at cheap-tool-emporium Harbor Freight. Its so frustrating to use I want to throw it at the cement wall. I will have to go buy a better one that actually secures the sandpaper.

Most importantly, I was perusing my jigsaw blades and saw something called a "scrolling blade." It was small and skinny. "Hmmmm, I betcha this is for going around corners a little tighter than the normal blades!" Hmmmm, I reckon I was correct... and this was after I cut the hole through the transom, BH2 and BH3. Boo me, for not knowing my tools. Again, amateur style is my building style.

Do you find information about Boat Plans For A Chesapeake Deadrise are you looking for? If not, below may help you find more information about the Boat Plans For A Chesapeake Deadrise. Thank you for visiting, have a great day.
Read More..

Boat Plans Aluminium Australia | Rudder stock design 4 Mast gluing

| 0 komentar |

Boat Plans Aluminium Australia


In yet another installment of "I try to re-design the rudder stock" I have received yet another set of plans from a Goat Island Skiff builder in New York.  He has graciously supplied me with these two schematics of his own design, as a solution to removing the tiller from the rudder assembly without having to take the rudder off the transom.  It is self-explanatory:


I really like this design, it is better than mine for two reasons:  1. It maintains Mr. Storers rudder stock design and hopefully solves the structural issue that he was concerned about, 2. There is less time fiddling over the transom pulling very critical pins over water of yet-to-be-determined depth, if you get my drift.  I can remove the tiller from the safety of the cabin.  Unfortunately, I will still have a stub of tiller sticking into my domain, but I think, for now, this is the idea Im going to go with.  The great thing about the rudder stock is that it is simple and easy to construct, I can always make another.

In other news, the mast was glued in its first step today.  In the previous post, I shaped the narrow staves.  This was a workout, but I worked carefully, and Im happy with the result.  Then, off to make the spacers for the ladder frame.  I used a piece of fir that was lounging around the garage, some stud material.  I used some good parts, and cut them to fit.  The base plug meant a trip to Lowes.  This is the first wood part of the boat that was not bought at either of my two local lumber stores.  Sorry guys.  Anyway, an 8 piece of 4x4 cedar.  I thought about using fir, for a few bucks less, but I went with the rot-resistant cedar.  Its an important piece, its light, and it should be good.  The other spacers Ill goo up with epoxy and make them plastic.


Well, that was interesting how the photos lined up, but I like it!  Notice the base plug.  After a quick mock-up my lovely wife and I took one of the uncut stave stock pieces and brought it into the basement, where I can get an even floor workspace and a slightly higher temperature, better for quicker gluing.  We made sure that we could get the wood in and out of the basement two different ways, so I dont build the mast and then get it out.  I am positive I can get the mast out of the basement.

Layed out ready for the dry fit:


Sweet, I did it again, but I dont know how.  The mast is quite straight, but I decided to use one of the wide uncut staves as a backbone for gluing, that way I could ensure that the mast is straight with no wobbles.  It also gives me a good even workspace for gluing too.  I covered one stave with packing tape, and glued away:  Notice too, the hardwood runners that will be glued to the bottom of the hull, they are long ones and needed to be scarfed.


It went well.  The bricks are slightly nudging the mast into a straight position.  Youll also notice that you dont see much of the wide stave underneath this glue-up, thats because the tolerances are super tight.  I overcut my narrow staves by 1mm and it pretty much ate up all the space on the wide stave.  I briefly considered re-planing the staves, re-working the spacers, and then gluing, but my lovely wife stopped me with some business graduate degree mumbo-jumbo stuff and talked me out of it.  I might have to plane a little extra off the base to get it to fit in the mast step, and I can (with difficulty) enlarge the mast step as well if need be.

Tomorrow, gluing the wide staves and completing the box.
 

Do you find information about Boat Plans Aluminium Australia are you looking for? If not, below may help you find more information about the Boat Plans Aluminium Australia. Thank you for visiting, have a great day.
Read More..

Boat Plans Butler | TWO HEARTED and IAZ P

| 0 komentar |

Boat Plans Butler


This is going to be a brief post, but it is very important that I prequel the upcoming week with exciting new developments here at Amateur Style!

Goat Island Skiff I Am Zinea, Pterodactylus now has a fellow partner in somewhat-high-seas shenanigans!  I present Capn Jons meticulous and spectacular Two Hearted, a Ross Lillistone Pheonix III.

HUZZAH!


HUZZAH!

Two Legends and Capn Jon-- cool guy who doesnt look at explosions
HUZZAH I say!





Do you find information about Boat Plans Butler are you looking for? If not, below may help you find more information about the Boat Plans Butler. Thank you for visiting, have a great day.
Read More..

Boat Plans Aluminum | BroVenture2011! Day 3 and 4!

| 0 komentar |

Boat Plans Aluminum


Ahoy Intrepid Readers!  We continue now on our epic Long Island Sound journey (well, there are more sounds, like Fishers and Block, but really, is there any other Sound like Long Island Sound!?  No.) as we return to our homeport in the Connecticut River!

To the startled reader, see the previous post for an explanation, this is a departure from my normal Goat Island Skiff adventures.

Day 3 Watch Hill/Napatree Point to Old Lyme:  This day dawned clear and bright, and we brothers arose to a beautiful beach, beautiful weather, and our beautiful selves.  I took our dinghy and paddled into shore to get egg sandwiches at the local coffee shop.  Note to reader, the coffee shop offers egg sandwiches that are unceremoniously microwaved and the coffee is better ordered as just coffee, because if you add cream and sugar, they will put so much syrup youll doubt there is any coffee in the cup at all.

Windsurfer board?  Check.

Extra long canoe paddle?  Check.

Stand-Up Paddleboard?  Not really, but Check.
El Skippero (Mexican) chilling out.  
After a swim and a run on the epic beach illustrated in the previous post we decided to haul anchor and head Westbound.  Since the tide was high, we decided to be manly, and make a run across the dangerous shallow shoals that are festooned on the chart with things like "submerged pipes" and "rocks" and lots of shallow areas.

The Skipper had a hunch to hug a line of red buoys that headed out, this would have made sense in any kind of maritime setting since they would have been on our port side, but I was led astray by other boaters who were cutting across the nefarious shallows further inland.  I mused that the red markers (which were not official navigational aids, or marked on chart) were marking out a danger area instead.  My little brother listened to me for what must be the second time in his entire life and acting as Skipper, L made his own decision attempt the shallows closer inland than Napatree Point.

We ran aground, because I was wrong.  My little brother will never again listen to me.

When we ran aground, I jumped overboard and came up to my waist.  So yes, we really were aground.  L started to plot furiously his escape, as we were losing time and tide.  I started getting line ready to haul up his damnable centerboard which was stuck in the down position, rendering his shoal draft boat useless as such, we might as well been a fixed keel.  As I prepared the lines, L took advantage of a gentle swell and gunned it!  Dragging centerboard across the sand, hitting obstacles along the bottom, and caring for nothing save not having to call Sea-Tow to come save us, we made it to the channel that was conveniently marked by the red buoys that headed out to sea!  Relief!  

The winds were light.  After a short stint of attempting to spearfish, which included a philosophical argument on what direction a speargun should be pointed, we set sail for home.

Island Packet "Winters Haven"

Island Packet "Winters Haven"  Note cool person.

Watching "Winters Haven" burn us.

The wind is picking up and were beginning to start moving now!
About right after this above picture was taken, many things happened at once.  We started really moving, with the leeward rail in the water and L and I up on the windward rail like a real racing boat!  At this point, I realized we had 40 lbs of unsecured anchor and chain on the forward deck!  I made my way forward just as those 40 lbs of nefarious metal slid overboard and over a hundred feet of scope unwound in dangerous "Deadliest Catch" fashion!  OH NO!  I could only imagine the destruction if the anchor caught on the bottom while we were moving at 5 knots in the opposite direction!  Needless to say, I saved the day.

The Skipper L pleased that I saved his boat from mishap.

Hero.  Note anchor now securely attached.
After saving the day, I decided to hang off a shroud, and promptly pulled it free.  That was another few minutes of drama, lemme tell you, but thanks to my ever-present box of tools I was able to fix it quick, cause Im a hero.  Then I made dinner.  Beans.

Making dinner #1 underway.
Sailing into the sunset.
This time, with our new chart, we successfully navigated around several reefs and found a mooring off of Old Lyme for the night.  This was a good thing, because it was dark and we dont have running lights.

We made dinner #2.


L says: Day 3

We motored out of Napatree Point and promptly ran aground.  We were attempting to follow an unoffical "cheat" channel, passable at high tide, but Christophe thought boats had been taking another route, which I foolishly followed, rejecting my gut instinct.  I got us out by gunning the outboard and powering the keel through the sand and shallows... and totally redeemed myself!  We dropped the hook off Napatree beach looking to do some spearfishing, but the current was ripping and the spot was too exposed (though visibility was clear), and the shipmates had differing views over speargun safety, so we looked at cool Christmas light jellyfish instead.  We headed back into Fishers Island Sound, where the wind suddenly picked up and we had a strong reach that we rode all the way to Old Lyme - a good few hours of straight sailing.  At one point, with the boat deeply heeled, Christophe leaned on a windward shroud and it snapped, almost dropping him overboard.  Good thing the other shroud stayed put, or I would have been practicing rescue sailing maneuvers.  We pirated another mooring (3 for the trip) and we learned how to use the anchor sail, though it did not prevent a boat-rolling sleep session.



Day 4 Old Lyme to Essex:  The next morning we awoke to heavy swells and queezy stomachs.  L, who has everything in his boat, found an anchor riding sail so fortunately we were pointed in the wind.  Now, the funny thing is that he didnt know what it was.  I had expressed the desire to have one so we could stay pointed in the wind and not rub against the mooring ball (THUMP THUMP THUMP all night).  L asked, "Is it small and triangular?" I answered in the affirmative.  "I have one of those."  Again, Ls magical-free-boat that came stocked with everything had an anchor riding sail that I have ever only seen in catalogs like the above link!

I cant express to you how useful this thing is.
After deciding to not really eat breakfast, we cast off the anchor and headed home to the beautiful Connecticut River.  The wind was fair but from the west, so we motored to the river mouth and then raised sail to glide northbound like Vikings of old raiding upstream villages!

The lighthouses welcome us and many other sea-weary sailors home.

173 years old and still a functioning navigation device.  This is called a durable technology.
Spanning the Connecticut River at its mouth are two bridges, the Old Lyme RR Drawbridge, and the "new" Baldwin Bridge carrying I-95.  The drawbridge operator works closely with the trains (namely Amtrak) and boaters to get people through.  He actually had a gap of "about a minute" and opened the bridge to sneak through some boats between two trains.  This guy was good.  It was pretty awesome.  We waited for a longer opening time, I didnt want to be responsible for a train wreck.

Now, I think if the winds are favorable, a sailor should be sailing.  So we were going to sail through these bridges, dammit!  Vikings didnt putt-putt under RR bridges!

Approaching the bridge, full speed ahead!

Sailing under the span!  We made it!

HAHA!  Success!  Pillaging ahead!
Nefarious I-95 is carried by the Baldwin Bridge.  Well sail under this one too.

More clearance on this one.
Its like the Hall of the Dwarf Kings.

Essex in View! Oh the Joy!
(Intrepid Reader who identifies which historical figure Im ripping off gets free GISamateur parking)
Nuff said.

And suddenly, just like that, we were home.  It was a fun 4 days.  If I could do it again, Id tow the Goat Island Skiff behind the boat so I could some small boat sailing and keep these posts at least a little more relevant to its title.  That, and there would have been some good sailing around Napatree Point, and to be honest, I miss my little handsome boat.

Otherwise, great adventure all around, some good stories, and some good weather.  Sure beat 4 days being a Landlubber!  Oh how I pity you landlubbers.

Until next time Intrepid Reader!

L says: Day 4

We reached the Connecticut river and began motor-sailing north, which against the ebb tide meant barely making progress.  The wind picked up near the bridge, and we took advantage by jibing in circles around the other boats that were patiently waiting.  As the bridge rose we sailed through, and were soon back at Essex dock.  The finale of the trip was anchoring my boat in Booty Cove (note: secret spot, not charted.. I will say that I am anchored between a bald eagles nest and a hobo camp).  There was an old man crabbing that tried explaining to Christophe that an osprey flying overhead was actually an eagle.  We whalered back to shore, the boat safe and sound and us with only minor dehydration and sunburn!  BroVenture 1 - Tragic Outcome 0







Do you find information about Boat Plans Aluminum are you looking for? If not, below may help you find more information about the Boat Plans Aluminum. Thank you for visiting, have a great day.
Read More..