Boat Plans And Patterns | Emerald Bay

Boat Plans And Patterns

We headed over to Catalina Islands Emerald Bay last week, expecting lots of activity for the Fourth of July holiday. This was the Finisterras first voyage to our favorite cove. We left the marina in Long Beach at 1500 and tacked up the harbor toward Angels Gate in light air. The UV cover on the jib let go after four or five tacks at the spot where it rubs on the mast mounted radar antenna, so we looked a bit ragged as we passed through the Gate, with a foot-long tatter trailing off the leach of the jib, but the boat sailed well until we ran out of wind. We motored the rest of the way to the cove, arriving at 1845.

Finisterra moored at Emerald Bay

We picked up a mooring behind Indian Rock and sat back to enjoy the view as the sun set behind the hills. On the trip over from the mainland we used the autopilot and about every twenty minutes it conked out, with "Drive stop" on the display. According to the manual, that message means that the linear drive quit because the force required to turn the rudder is too great for the system. That doesnt sound right to me because the helm was pretty light at all times, so in the next few days Ill be tearing into the system to find out whats really going on there.

The boat is equipped with electric heads that use fresh water to flush. Im not a fan of them and, sure enough, the aft head stopped working. So well swap them out for the tried and true Jabsco manual heads. Aside from that little glitch, the boat and its systems worked well throughout our stay.

Calm weather prevails as we look toward the west end of the Island 

Since this was our first trip aboard the boat, there were lots of little things to fix, and this took some time, but we still had plenty of opportunities to hike and putter around the anchorage in the dinghy. We met some folks from Corsair Yacht Club, John and Judy, who sail a beautiful old Ericson 41. They invited us to a barbeque at their club site, which is located next to the scout camp near the west end of Emerald Bay. It was nice to connect with them. The next day we hiked out toward the west end of the island past Parsons landing, where the views were spectacular and we saw lots of signs of deer, island fox and bison.

Not far from Parsons Landing we encountered this bison on the trail. Notice that his horns have been clipped. For several years the Island conservancy kept them out of the the west end of the Island, but nowadays they roam freely.

The weather stayed cool and overcast until our last day, and we departed the island under beautiful blue skies and sparkling sunshine. The Finisterra sailed under main and raggedy jib, doing seven and a half knots, until we reached the entrance to LA harbor. Passing the lighthouse, we hardened up and reefed the jib in about 20 knots of wind and sailed up the main channel to get a glimpse of the famous old battleship USS Iowa, which recently took a permanent berth near the maritime museum. The ship first deployed in 1943, and participated in bombardments of Japan in WWII. As the war drew to a close, the Iowa was present along with the USS Missouri in Tokyo Bay for the official surrender of Japan, marking the end of the World War. It is interesting to note that it was during WWII that the battleship, with its big guns was supplanted by the aircraft carrier as Americas premier seaborne combat weapon. Already obsolete by the end of the war, the USS Missouri was the last US battleship to be built. 

USS Iowa at her permanent home in Los Angeles harbor

The big guns on the Iowa are impressive artifacts of a bygone era

Leaving the Iowa behind, we headed back down LA harbors main channel and bore off for Long Beach, only to be confronted with the sight of a large ship entering the harbor loaded down with several new hammerhead cranes destined for service loading cargo in the Port of Long Beach. It was quite a sight to see the ship with its cranes working its way, with the help of a couple of tugs, through the harbor entrance and into her berth. The cranes were painted with the COSCO/SSA emblem. COSCO, not to be confused with Costco, is short for China Ocean Shipping Company. SSA is an American logistics company that manages marine shipping terminals.

Its hard to imagine this shipload of cranes crossing the Pacific. The weather routing service earned their pay on this project. Shipping companies, like us regular yachties, use routing services to route their ships to avoid weather systems. 

Three tugs guide this unwieldy ship to her berth in Long Beach harbor.

We got back into our slip before sunset after a nice sail down the harbor. I have been pleasantly surprised by the performance of the boat with the small roller furling main sail and look forward to sailing with the new rig. The mast has been shipped from the manufacturer and we expect it to arrive this Friday. 

Do you find information about Boat Plans And Patterns are you looking for? If not, below may help you find more information about the Boat Plans And Patterns. Thank you for visiting, have a great day.

Read More..

Boat Plans Aluminum | X Yachts XC 38 Review

Boat Plans Aluminum

Over the last thirty years or more, X-Yachts has created a reputation for building fast, high quality sailboats that have won major regattas in both the old and new worlds. In recent years they have broadened their product lines to include all-out cruising yachts, as opposed to the racer-cruisers they have built their fine reputation on. I think Niels Jeppesen has been the chief designer for the company since it was founded around 1979, and he has produced a long and successful string of what I consider conservatively aggressive sailing yachts. Their cruising boat line carries the designation "XC" and the  XC-38 is the smallest in that line.

XC-38: Conservative proportions coupled with a powerful rig.

 Ive always liked the juxtaposition of conservative and aggressive characteristics that Jeppesen and his team instill in their products and this 38 footer is an excellent example of their thinking. With its relatively springy sheer and conservative cabin trunk, beefy hull and aggressive rig, the XC-38 looks like a fun, yet serious cruising yacht. It is, to my mind, unfortunate that we dont see more of this type of boat on the west coast of the USA. In studying the profile view above, notice the depth of the hull and the proportions of the underbody. My guess is that the hull incorporates "V" shaped sections instead of the the more often seen "U" shaped bottom. Couple this with the efficient keel and deep rudder and you have a hull that will be especially fun to sail upwind. Here are some stats:
LOA:            37.99
LWL:            34.06
BMAX:         12.50
Draft:               6.50
DISP:            19,621 LB
BAL:               8,448 LB
SA:                     865 SF
BAL/DISP      43%
D/L ratio:        221
SA/D ratio      19

These numbers are indicative of  boat of moderate proportions and good manners.The keel and rudder are deep and efficient shapes for cruising. These days there is no shortage of stuff in the water to snag and foul keels and rudders. You only have to dive overboard to free the keel from nets, pots or kelp in the middle of the night a few times to appreciate clean and streamlined appendages on your boat.

Big cockpit, artfully curved windshield, conservative lines.

On deck youll find simple lines forward without any fancy flourishes. The foredeck is flat and uncluttered, with an anchor locker and deck mounted windlass. The nearly plumb bow requires a bowsprit of some sort so the anchor rode doesnt rub the finish off the hull when at anchor.

Clean lines forward and an A-frame bowsprit

The sailplan incorporates non-overlapping jibs. Ive designed a number of boats with this type of rig and its great for windward/leeward racing. Its not as good for reaching because when you ease the sheet on this type of jib, the top of the sail opens up much more than the bottom so you end up reaching with the lower part of the jib over-trimmed to keep the top from flogging. One solution is to set up outboard leads for the jib and thats what Id do on this boat if I owned one.

Twin wheels, trapdoor transom and artfully curved windshield.

The cockpit on this boat incorporates nice, high coamings and twin wheels along with a curved windshield. This arrangement invites comparisons with the Hallberg Rassy 412. Notice the instrument console on centerline, with a dropleaf table incorporated into it. This is an acceptable arrangement for daysailing but not very good for passage-making, although it is redeemed somewhat by the instrument displays built into the forward cockpit coaming. The fact is that cruisers spend little time behind the wheel when on a passage, so locating vital displays back there is inconvenient at best. Aboard the Honcho we mounted the GPS on a swivel just forward of the binnacle so you could see it from anywhere in the cockpit. We also traded the Raymarine instruments for TackTick wireless units, which could be mounted anywhere we wanted them, even below. Our Beneteau 423, Finisterra, came with the Raymarine instruments and, reliable as they are, weve already replaced them with Tackticks. Another unfortunate aspect of this cockpit is the permanently mounted dropleaf table that bisects the cockpit. Again, we have this arrangement on the Finisterra and find it to be inconvenient when sailing. Ive already started designing a stowable table that will give us room to maneuver while under sail and still provide fine dining accommodations in the cockpit when we need them. Notice the nearly vertical transom. It sports a drop-down panel and gate to make a swim step or platform. I think a reversed transom with a molded-in swim step is preferable because it is so much more convenient than this arrangement. It would also increase the sailing length of the boat and reduce turbulence at the  transom.

Nearly perfect accommodations plan

X-Yachts offers only one interior plan in the XC-38, which is fine with me because it works really well. The forward cabin is spacious and incorporates a large V-berth, multiple lockers and cabinets, and plenty of light. Those windows built into the hull look small but provide a good deal of light and visibility. The settees in the main cabin are big enough to serve as sea berths. With the galley, nav station and head aft, the crew that sleeps in the main cabin wont be disturbed when you go below to check the chart or fix a cup of coffee during the midnight watch. The galley is large, with lots of counter space and double sinks amidships. I respect the designers decision to eschew a second head on this boat. One is plenty for the cruising couple and this one incorporates enough room for a shower as well. The aft cabin offers a good sized berth and plenty of storage. In studying the photos of the boat on the X-Yachts web site, it took some time to get used to the horizontal grain pattern on the furniture. Im not sure I like it yet, so Ill reserve judgement until I see a boat in person.

Overall, I think the XC-38 would make a very good medium sized cruising yacht. Id ask for that reverse transom and swim step if I ordered one but other than that, this boat is ready to cruise.

Do you find information about Boat Plans Aluminum are you looking for? If not, below may help you find more information about the Boat Plans Aluminum. Thank you for visiting, have a great day.

Read More..