Wood Boat Plans And Kits | The Columbia 43 a classic Tripp racer

Wood Boat Plans And Kits

The Columbia 43 is a big, muscular boat made for long ocean races. The boat is largely forgotten now because its birth coincided with the death of the rating rule it was designed to race under.

With a long, flush deck and a low gun-turret house, the boat is easily recognizable as coming from the drafting board of William H. Tripp, Jr., one of the great designers of the Cruising Club of America racing era. Trip designed the Columbia 43 as part of a suite of racing and cruising boats for Columbia Yachts that included two of the largest production boats of the 1960s, the Columbia 50 and the Columbia 57. In fact, the first model of the Columbia 43 had a Columbia 50s deck house.

Columbia 43 hull number 1 with the deck house off a Columbia 50.

The Columbia 43 is a fast boat. In its early years, a 43 finished first-in-class in the Transpac race from San Pedro, Calif., to Honolulu, Hawaii. As the International Offshore Rating rule took over the racing scene, the Columbia 43 was left behind in favor of boats that would rate better under the new rule. With the popularity of sailboat racing under PHRF, the Columbia 43 is again a contender for the silver.

A Mark III recognizable by her small rectangular ports.

Columbia also came out with a Mark III model that was even more competitive as a racer. It had a keel with a shorter chord and lead ballast, a modified rudder, and six additional feet of mast height. Columbia also abandoned its trademark long, low window on the side of the house for this model and substituted two, rectangular ports on each side giving it a mean, pillbox look.

Tripps name is synonymous with CCA racers that have centerboards, so, naturally, there is a centerboard version of the boat as well. It has an additional 1,300 pounds of ballast and a minimum draft two feet less than the keel version.

The boat was well laid out for racing with a galley to port and a U-shaped dinette to starboard, a step down takes you to the main saloon with facing settees that convert to four single bunks. Forward of that is a small head to starboard with a large standing chart table and a V-birth in the forepeak, The arrangement is somewhat less desirable as a cruising boat for a couple, but it is still workable. The boat also carried 50 gallons of fuel and 50 gallons of water, about half of what you would want on a cruising boat that size.

Columbia built 153 of the 43s: about a third at its yard in Portsmouth, Va., and the rest in the Costa Mesa, Calif., yard. A smaller number (about six) of the Mark IIIs were built. The longevity of heavy fiberglass construction means most are still sailing.

At least one Columbia 43 has circumnavigated the globe. Other boats ended up scattered across the world in the Mediterranean,Caribbean and the islands of the Pacific as well as in every coastal state. A 43 in Aruba takes out 22 passengers for day sails; a job its done every day for more than 30 years under two generations of owners. The large deck and 10-foot cockpit comfortably handles all 22 passengers. A tough boat indeed.

Columbia 43 under sail on the Columbia River.

Heres the Columbia 43 by the numbers:

• Length: 43 feet 3 inches
• Beam: 12 feet 4 inches
• Draft: 6 feet 11 inches
• Waterline Length: 32 feet 8 inches
• Displacement: 22,200 pounds (one source says 18,900 pounds)
• Ballast: 9,500 pounds
• Sail Area: 806 square feet
• Sail Area/Displacement: 18.24
• Ballast/Displacement: 50.26 percent
• Displacement/Length: 257.49
• Theoretical Hull Speed: 7.5 knots 
• Vertical Clearance: 58 feet 4 inches
• Built between 1969 and 1974
• Number built: 153
• PHRF number: 102 (Columbia 43 Mark III has a PHRF number of 96)

Do you find information about Wood Boat Plans And Kits are you looking for? If not, below may help you find more information about the Wood Boat Plans And Kits. Thank you for visiting, have a great day.

Related Posts by Categories